Triple Nozzle - Kärcher HDS 5/11 U Service Manual

5.8.2 Triple nozzle

The triple nozzle can be adjusted to three different
settings.
By rotating the nozzle head, you can switch between
the chemical nozzle and the high pressure nozzles.
The symbols on the nozzle head show which nozzle
type is selected.
Setting A means high pressure point jet.
Setting B means low pressure flat jet.
This setting is used to apply the detergent.
Setting C means high pressure flat jet.
1 High pressure point jet (A)
2 High pressure flat jet (C)
3 Low pressure flat jet (B)
4 Adjustable nozzle head
5 Nozzle
6 Nozzle channel
7 Valve ball 2x
8 Vavle ball cage
9 High pressure channel
10 Spray pipe connection
22
English 5.906-487.0 Rev. 00 (04/10)
To adjust the needed type of nozzle, the gun must be
closed and the nozzle head must be rotated to the
settings shown above (A, B, C).