6.2.1 Replace the seal of the rotary grommet
Pull the crank straight off of the hose drum and re-
move the side part.
1 Crank
2 Side part
Remove the screws underneath the side part and
take out the hose drum half shell.
1 Screws
2 Hose drum half shell
Remove the seal screw.
Remove the knot and the axle.
1 Node piece
2 Seal screw
42
English 5.906-487.0 Rev. 00 (04/10)
Replace seals and grease with PFAE grease
(6.288-088).
Check the axle and the knot for wear in the area of
the seals.
1 Seal screw
2 Node piece
3 Axle
4 Sealings