Advertisement
Available languages
Available languages
work on the appliance unless they are
supervised.
∙ For frequent cleaning we recommend
the use of warm water with some mild
detergent. For detailed information on
cleaning the appliance, please refer to
the section Cleaning and care.
∙ To avoid the risk of electric shock, do
not clean the appliance with liquids or
immerse it.
∙ This appliance is designed for storing wine only.
∙ To prevent the risk of personal injury or damage to the unit, it
must only be transported while in its original packaging. Two
people are required for unpacking and installation.
∙ Caution: Keep any packaging materials well away from
children – these are a potential source of danger, e.g. of
suffocation.
∙ The power cord should be regularly examined for any signs
of damage. In the event of such damage being found, the
appliance must no longer be used.
∙ To avoid the risk of fi re, do not place any electric appliances
on top of the unit. Do not place any liquid containers on top
of the unit: this will prevent any leaking or escaping liquid
damaging the electrical insulation.
∙ Do not lean or put undue weight on the shelves, door etc.
∙ Protect the inside of the unit at all times from open fl ames
and any other sources of ignition.
∙ Remove the plug from the wall socket
- in case of any malfunction,
- before de-frosting,
- during cleaning,
- before maintenance or repair work is carried out.
∙ When removing the plug from the wall socket, never pull on
the power cord; always grip the plug itself.
∙ If the unit is not used for an extended period of time, we
recommend keeping the door open.
∙ We reserve the right to introduce technical modifi cations.
Familiarisation
1.
Door hinge cover
2.
Door hinge
3.
Double-walled glass door
4.
Power cord
5.
Adjustable feet
6.
Chrome-plated storage racks
7.
Housing
8.
Drain channel
9.
Compressor
10. Interior lighting with On/Off switch
11. Temperature control
Before using for the fi rst time
∙ Remove any exterior and interior packaging materials.
∙ Ensure proper disposal of all packaging materials.
∙ Clean the unit according to the instructions given in the
Cleaning and care section.
∙ The unit should only be transported in its vertical position;
do not tilt any more than 30°.
∙ Once the unit has been positioned, wait for about 30
minutes before it is connected to the mains.
∙ If the unit has been tilted more than 30° during transport,
allow it to stand upright for at least 4 hours before it is
connected to the mains.
∙ When the unit is fi rst switched on, a slight 'new' smell may
be noticed. However, this will disappear once the cooling
process has begun.
Installation
∙ The appliance should be set up in a well-ventilated, dry
room.
∙ It should be operated in conditions where the relative
humidity is no more than 70 %.
∙ The product data sheet contains details of the ambient
temperature range suitable for this appliance.
∙ Do not place the appliance outdoors.
∙ Ensure that the plug is accessible and can be removed from
the wall socket at any time.
∙ Do not expose the appliance to direct sunlight, and do not
position it next to any heat sources (radiators, cookers etc).
If this cannot be avoided, however, suitable insulation must
be in installed between the heat source and the unit.
∙ The unit must not be installed inside a cabinet, nor directly
below a hanging cupboard, shelf or similar object.
∙ Ensure that the door can swing open to an angle of 90°.
∙ If the fl oor is uneven, the adjustable feet on the unit can be
used to compensate and ensure optimum stability.
Ventilation
The heated air around the unit must be able to circulate freely.
Therefore, ensure that the circulation around and above the
unit is not obstructed.
The clearance must be at least 150 mm.
Temperature control
∙ The unit is activated by connecting it to the mains. It is only
switched off completely when the plug is removed from the
wall socket.
∙ The temperature in the refrigerator cabinet can be adjusted
by setting the temperature control (1-7). Turning the control
clockwise will decrease the temperature, while turning it anti-
clockwise will increase it.
∙ The temperature can be set within a 5 to 18 °C range.
∙ The temperature in the cabinet largely depends on factors
such as the ambient temperature, the setting and the
number of wine bottles stored.
∙ We recommend using a thermometer to check the actual
temperature inside the cabinet and make adjustments as
necessary.
11
Advertisement
