Table of Contents
Advertisement
1 LAN 1
2 LAN 2
System Setup
Important Safety Information
Getting Started with the TPC-22xx
Figure 1 shows the I/O port arrangement.
3
1
2
3 USB
4 COM2 (RS422/485)
For more TPC-22xx specifications, refer to the
Before setting up the TPC-22xx, read these safety instructions carefully.
Disconnect this equipment from any AC outlet before cleaning. Use a damp
cloth. Do not use liquid or spray detergents for cleaning.
For plug-in equipment, the power outlet socket must be located near the
equipment and must be easily accessible.
Keep this equipment away from excessive humidity.
Place this equipment on a reliable surface during installation. Dropping it
or letting it fall may cause damage.
The openings on the enclosure are for air convection and protect the
equipment from overheating. Do not cover the openings.
Make sure the power source voltage is correct before connecting the
equipment to the power outlet.
Position the power cord so that it cannot be stepped on. Do not place
anything over the power cord.
All cautions and warnings on the equipment should be noted.
If the equipment is not used for a long time, disconnect it from the power
source to avoid damage by transient overvoltage.
4
5 COM1 (RS232)
Figure 1. I/O Port Arrangement
2
5
Specifications
section.
ni.com
Advertisement
Table of Contents
