International Safety Symbols; Safety Notes - Extech Instruments PRC10 Instructions Manual

Introduction
Thank you for selecting the Extech Model PRC10. This device is shipped fully tested and calibrated
and, with proper use, will provide years of reliable service. Extech Instruments is an ISO-9001
certified company.
Safety

International Safety Symbols

This symbol, adjacent to another symbol or terminal, indicates the user must refer to the
manual for further information.
This symbol, adjacent to a terminal, indicates that, under normal use, hazardous voltages
may be present
Double insulation

Safety Notes


Do not exceed the maximum allowable input range.

Turn the unit OFF when the device is not in use.

Remove the batteries if the device is to be stored for longer than 60 days.

Never dispose of batteries in a fire. Batteries may explode or leak.

Never mix battery types. Always install new batteries of the same type.
Cautions

Improper use of this meter can cause damage, shock, injury or death. Read and understand
this user manual before operating the meter.

Always remove the test leads before replacing the battery.

Inspect the condition of the test leads and the meter itself for any damage before operating the
meter. Repair or replace any damage before use.

If the equipment is used in a manner not specified by the manufacturer, the protection provided
by the equipment may be impaired.
actoolsupply.com
2
actoolsupply.com
PRC10-EU-EN-V1.2 01.13