Cleaning And Maintenance - Chicco Lullaby Baby Owner's Manual

This product requires regular maintenance. The cleaning and maintenance of the
playard must only be carried out by an adult.
The mattress cover, napper cover and changer insert can be washed, remove the
boards from the mattress cover and napper cover as shown.
Locate the zipper on the
mattress cover and unzip.
Remove all of the floor
boards and set them aside.
Do not immerse the wooden boards in water. Wipe clean with a damp cloth and mild
detergent (do not use bleach).
CLEANING
Please refer to the care label for instructions on cleaning the fabric parts of the playard.
Periodically wipe clean plastic parts with a soft damp cloth. Always dry the metal parts
to prevent the formation of rust if the playard has come into contact with water.
MAINTENANCE
Periodically check the playard for loose screws, worn parts, torn material or stitching.
Replace or repair the parts as needed. Use only Chicco replacement parts. Keep the
playard in a dry place. If playard becomes wet open playard and allow to dry
completely. Prolonged exposure to direct sunlight may cause the fabric to fade
and plastic parts to warp.

Cleaning and Maintenance

On the back of the Napper
undo the zipper. Remove
the Napper Pad from the
Napper Frame. Locate the
opening at the back of the
napper cover and remove
the boards and set them
aside.
49