Chain Dialling; Insert Dialling Pause; Calling Additional Telephone Functions; Hands-Free - Philips MAGIC 5 ECO PPF 675 User Manual

ppf-675-eco-manual-uk-253120913-b.book Seite 12 Mittwoch, 30. September 2009 12:58 12

Chain Dialling

You can co mbine and edit manually entered digits and
saved entries, before the dialling process starts. If you have
saved, for example, the tele phone number prefix of a n
inexpensive telephone service provider (call-by-call) as a
EN
telephone book entry, select this entry and manually enter
the subsequent telephone number or select another saved
entry.

Insert Dialling Pause

It may be necessar y to insert a d ial pause in telephone
number, for example, for a direct-inward dialling number,
a sub-address or in a long distance number
pressed (for at least two seconds). – appears on the display.
The second part of the number is dialled only after a short
pause.
Calling additional telephone
functions
Function is not supported in all countries and networks
(Function is not supported in all countries and
networks)
Additional Telephone Functions
You can use additional telephone functions with your
device for example call toggling, three-way call or call for-
warding. Contact your tel ephone company to in quire
whether or not these functions are available for your con-
nection. The signal to the switchboard to call these services
is a short line interruption (H ook Flash). How to call up
the functions, depends on your telephone co mpany and
may vary from the description found below.
Making a Second Call
1 During a call, press R.
2 Enter the desired number using the numeric keypad or
select a saved entry.
Switching Between Calls (= Call
Toggling)
Switching Between Calls
Press R, to toggle between the calls.
Receiving a Second Call
Call Waiting
During a call, you can be informed about another call by a
notification tone (= call waiting) if your telephone com-
pany offers this service. The notification tone for call wait-
ing on the device is switched off in the factory.
Receiving a Second Call
During a call, press R to accept the new call.
CLIP Prerequisite
Notice
Calling Line Identification (CLIP)
For this function to work, the Caller Line Iden-
tification (CLIP) must be activated for your tel-
ephone connection (country and network
dependent). The number and name will not be
shown if the caller suppresses his number.
12
Switching Notification Tone for
Call Waiting On/Off
1 Press OK, 42 and OK.
2 Use [, to select whether you would like to turn the
call waiting on or off.
3 Confirm with OK.

Hands-Free

1 Press ß to dial without lifting up the handset. You will
hear a dial tone from the loudspeaker.
2 Enter the desired number using the numeric keypad or
. Hold R
select a saved entry. The dialling process begins imme-
diately. At thi s stage, any numbers that have been
incorrectly entered can no longer be changed.
Handset Near the Device
Notice
Hands-Free
Put the handset near the device with the micro-
phone facing up in order to achieve an optimum
communication.
Recording a Telephone Con-
versation

Recording a Telephone Conversation

You can record a telephone conversation. After recording,
the ä key flashes, and you can hear the recording
like a message on the answering machine.
Recording a Telephone Conversation
Recording a Telephone Conversation!
You must inform your caller when recording a
telephone conversation.
Recording a Telephone Conversation
1 During a call, press b. The recording begins.
2 Press b again to end the recording.
Telephone Book of the
Device
Telephone Book
In the telephone book of your device, you can save entries
with multiple nu mbers and co llect multiple entri es into
groups. You can assign variou s ring tones to the entries.
Follow the specifications in the technical data.
Cursor Navigation 1
Notice
Navigating in the Editor
You can m ove the cursor using [. Use C to
delete individual characters. Press STOP to
close the menu and return to the starting mode.
CAUTION!
Philips · PPF 675