1. Manuals
  2. Brands
  3. Appostar Manuals
  4. Touch terminals
  5. SP-7260
  6. User manual

Appostar SP-7260 User Manual

Multi function pos
Hide thumbs Also See for SP-7260:
Table of Contents

Advertisement

Quick Links

Download this manual
http://www.appostar.com
Multi Function POS
SP-7260
User's Manual
Edition: Jun 2014
Version 1.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SP-7260 and is the answer not in the manual?

Questions and answers

Related Manuals for Appostar SP-7260

Summary of Contents for Appostar SP-7260

  • Page 1 Multi Function POS SP-7260 User’s Manual Edition: Jun 2014 Version 1.0...
  • Page 2 SP-7260 Mu ulti Function P...
  • Page 3 The material in this document is for information purpose and is subject to change without prior notice. APPOSTAR has made every effort to ensure that this user’s manual is accurate and complete. However, no liability is assumed for any errors and omissions that may have occurred.

  • Page 4: Important Safety Instructions

    6. Do not place heavy objects on top of the product or lean them against the product. These items may fall down and cause injury. 7. Do not block the air vent of the product as this can cause heat accumulation inside the box machine and may cause a fire. SP-7260 Multi Function POS...

  • Page 5: Table Of Contents

    Table of Contents CHAPTER 1 Product Overview ..........2 1.1 Unpacking ..................2 1.2 Appearance .................. 3 1.3 I/O Interface ................5 1.4 Specification ................6 CHAPTER 2 Hardware Installation ........7 2.1 Magnetic Stripe Reader (MSR) Installation ........7 CHAPTER 3 Software Installation ........

  • Page 6: Unpacking

    1. POS Termina l Main Un Power A Adapter 3. Power cord 5. Drive r CD 4. Quic ck Refere nce Guide (User r’s Manua l included SP-7260 M Multi Function n POS...

  • Page 7: Chapter 1 Product Overview

    PRODUCT OVERVIEW 1.2 Appearance Front View 15” LCD touch panel MSR (optional) / Attachable on both sides Scanner Rear View I/O Cover SP-7260 Multi Function POS...

  • Page 8: Side View

    PRODUCT OVERVIEW Side View Tilt angle 0~90 degree Scanner View Scanner angle 0~66 degree SP-7260 Multi Function POS...
  • Page 9 ODUCT O VERVIEW 1.3 I/O O Inter rface Port scription Descrip ption 1.5W in ntegrated PEAKER AN port w with RJ45 speake er x 2 erial port with POWER On / Of ff switch B9/M con nnector erial port with C-INPUT J45(5V de efault)

  • Page 10: I/O Interface

    Storage Temperature -20°C ~ 60°C Operating Humidity 15%~80% RH Storage Humidity 20% ~90% RH Mechanical Housing Color Black Construction ABS + SECC Dimension (W x D x H) 355 x 240 x 390 mm Weight N.W 6.7kg SP-7260 Multi Function POS...

  • Page 11: Chapter 2 Hardware Installation

    2.1 Magnetic Stripe Reader (MSR) Installation An optional MSR can be installed on both right and left side of SP-7260. By default, the MSR is installed on the right side. Step 1 Remove the cover from the Step 2 Connect the MSR cable MSR extension slot.

  • Page 12: Chapter 3 Software Installation

    Insert the driver CD into your CD-ROM drive. Windows will automatically detect it and the Appostar Driver Installer appears on the screen. If not, locate the Setup.exe file at CD:\ and double-click it to execute the one-step driver installation. Follow the on-screen instructions to complete the installation.

  • Page 13: Peripheral Device Driver Installation

    Uncheck the “Install PS/2 interface driver” Select the “Install RS232 interface driver” option. Click Next to continue. option. Click Next to continue. Select the None option and click Next to Select the “Support Multi-Monitor System” continue. option. Click Next to continue. SP-7260 Multi Function POS...
  • Page 14 Select the Destination Folder or use the Type a Folder name or use the default one default one listed. listed. Click Next to continue. A progress window appears. Please wait. Click Yes. The installation completes in seconds. SP-7260 Multi Function POS...

  • Page 15: Chapter 4 Board Setting

    JPC1/3/4/5/6: Voltage Switch jumper for JCOM1/3/4/5/6 ports This header is for controlling the Pin9 of COM ports to switch Ring/ 5V/12V. Pin 1-2 Close: Pin9=5V Pin 3-4 Close: Pin9=Ring (Default) Pin 5-6 Close: Pin9=12V Remark: Max output: 12V@500mA for each COM port SP-7260 Multi Function POS...

  • Page 16: Pin Assignment

    Max output: 12V@500mA for each COM port JCOM2: Serial Port Connector Assignment COM2_RI COM2C_DSR COM2C_TXD COM2C_RXD COM2C_RTS COM2C_CTS COM2C_DTR ATTENTION To avoid system malfunctions, DO NOT change the default setting by yourself. Contact your dealer for assistance if needed SP-7260 Multi Function POS...

  • Page 17: Chapter 5 Initializing

    24-line scan pattern. Barcode labels can easily be read by presenting them to the scanner. NOTE Since this scanner is a presentation scanner, best results are obtained if the barcode is moved towards the scanner. SP-7260 Multi Function POS...

  • Page 18: Maintaining

    This scanner requires little maintenance. Only occasional cleaning of the scanner window is necessary to remove dirt and fingerprints. Cleaning can be performed during operation with a non-abrasive glass spray cleaner and a soft lint-free cloth. SP-7260 Multi Function POS...

  • Page 19: Chapter 6 Troubleshooting

    USB KB emulation protocol with ALT-method character transmission. When using USB plus power cable (with the green connector), the scanner defaults to USB-IBM-POS protocol for tabletop scanners. These settings are restored after programming “back to default” using the Configuration Guide. SP-7260 Multi Function POS...

  • Page 20: Appendix

    Programming Mode, is not allowed and the scanner will not accept this data. At any moment (in Programming Mode) you can scan code 1.2 to close the programming mode without update, or code 1.3 to return to default setting. SP-7260 Multi Function POS...
  • Page 21 GS1 DataBar Expanded DECODER CONFIGURATION DEFAULT Min. length Interleaved 2/5 CODE IDENTIFIERS DEFAULT Code identifiers NOTE: + In Asian Mode, it is set at US Keyboard. ++ In Asian Mode, it is set at 0 mSec. SP-7260 Multi Function POS...
  • Page 22 Important: Please note that EAN/UPC codes with Add-On are transmitted without a separator. Programming flow chart CHANGE SCANNER SETTINGS OPEN PROGRAMMING MODE BY SCANNING CODE 1.1 CHANGE SCANNER SETTINGS BY SCANNING CODE 2.1.x – 10.x.x CLOSE PROGRAMMING MODE BY SCANNING CODE 1.1 SAVE AND EXIT SP-7260 Multi Function POS...

  • Page 23: General

    APPENDIX 1. General 1.1 OPEN PROGRAMMING MODE OR CLOSE PROGRAMMING MODE WITH UPDATE 1.2 CLOSE PROGRAMMING MODE WITHOUT UPDATE SP-7260 Multi Function POS...
  • Page 24 Use this code to return to the original factory default setting. Important: Programming Mode is closed after scanning this code. 1.8 EMEA MODE Note: For European, Middle East and African countries, read the following bar codes to set in EMEA mode. 1.1→1.8→1.3 SP-7260 Multi Function POS...
  • Page 25 Note: For Asian and other countries (except European, Middle East and African countries), read the following bar codes to set in Asia mode. 1.1→1.9→1.3 1.15 FIRMWARE VERSION 1.15 Note: Output the firmware version by read the following bar codes: 1.1→1.15→1.1 SP-7260 Multi Function POS...

  • Page 26: Scanner Functionality

    APPENDIX 2. Scanner functionality 2.1 Speaker settings 2.1.1 SPEAKER FERQUENCY 2.1.1 Note: Repeat reading this bar code to obtain different tone. 2.1.2 SPEAKER VOLUME 2.1.2 Note: Repeat reading this bar code to obtain different volume. SP-7260 Multi Function POS...
  • Page 27 APPENDIX 2.2 Sleep mode 2.2.1 SLEEP MODE OFF 2.2.1 Note: This setting will reduce the product life time. 2.2.2 SLEEP MODE AFTER 10 MINUTES (DEFAULT) 2.2.2 SP-7260 Multi Function POS...
  • Page 28 APPENDIX 2.2.3 SLEEP MODE AFTER 30 MINUTES 2.2.3 2.2.4 SLEEP MODE AFTER 60 MINUTES 2.2.4 SP-7260 Multi Function POS...
  • Page 29 APPENDIX 2.3 Scanner timing 2.3.4 SAME CODE DELAY 300MSEC 2.3.4 2.3.7 SAME CODE DELAY 600MSEC 2.3.7 SP-7260 Multi Function POS...

  • Page 30: Usb Communication

    2. USB IBM fixed POS scanner 3. USB IBM handheld scanner emulation Important: Reset (re-power) the scanner after changing one of the options listed above. 3.1.1 USB KEYBOARD EMULATION (DEFAULT) 3.1.1 3.1.2 USB IBM FIXED POS SCANNER 3.1.2 SP-7260 Multi Function POS...
  • Page 31 APPENDIX 3.1.3 USB IBM HANDHELD SCANNER EMULATION 3.1.3 3.1.4 USB COMPORT EMULATION 3.1.4 SP-7260 Multi Function POS...

  • Page 32: Decoding Parameters

    APPEND 4. Dec coding p parame eters coder se election 4.1.1 EA AN/UPC O ON + ADD DON OFF ( (DEFAULT 4.1.1 4.1.2 EA AN/UPC O OFF + ADD DON OFF 4.1.2 SP-7260 M Multi Function n POS...
  • Page 33 If the scanner reads an EAN/UPC code without Add-On, the scanner will look for a certain extra time for an Add-On. If this time has elapsed and no Add-On is found, the scanner will just send the EAN/UPC main code. 4.1.5 EAN/UPC + ADDON MANDATORY ON (FOR378/379/414/419/434/439/529/977) 4.1.5 SP-7260 Multi Function POS...
  • Page 34 APPENDIX 4.1.20 CODE 128/EAN 128 ON 4.1.20 4.1.21 CODE 128/EAN 128 OFF 4.1.21 SP-7260 Multi Function POS...
  • Page 35 APPENDIX 4.1.25 CODE 39 ON 4.1.25 4.1.26 CODE 39 FULL ASCII ON 4.1.26 SP-7260 Multi Function POS...
  • Page 36 APPENDIX 4.1.27 CODE 32 ON 4.1.27 4.1.28 CODE 39/CODE 32 OFF 4.1.28 SP-7260 Multi Function POS...
  • Page 37 APPENDIX 4.1.30 CODABAR ON 4.1.30 4.1.31 CODABAR OFF 4.1.31 SP-7260 Multi Function POS...
  • Page 38 APPENDIX 4.1.35 INTERLEAVED 2/5 ON It is mandatory to select a minimum code length using the appropriate bar code in paragraph 4.2 to prevent short reads. 4.1.35 4.1.36 INTERLEAVED 2/5 OFF 4.1.36 SP-7260 Multi Function POS...
  • Page 39 APPENDIX 4.1.39 MSI PLESSEY ON 4.1.39 4.1.40 MSI PLESSEY OFF 4.1.40 SP-7260 Multi Function POS...
  • Page 40 APPENDIX 4.1.41 CODE 93 ON 4.1.41 4.1.42 CODE 93 OFF 4.1.42 SP-7260 Multi Function POS...
  • Page 41 APPENDIX 4.1.43 ISBN ON 4.1.43 4.1.44 ISBN OFF 4.1.44 SP-7260 Multi Function POS...
  • Page 42 APPENDIX 4.1.45 ISSN ON 4.1.45 4.1.46 ISSN OFF 4.1.46 SP-7260 Multi Function POS...
  • Page 43 APPENDIX 4.1.47 GS1 DATABAR ON 4.1.47 4.1.48 GS1 DATABAR OFF 4.1.48 SP-7260 Multi Function POS...
  • Page 44 APPENDIX 4.1.49 GS1 DATABAR EXPANDED ON 4.1.49 4.1.50 GS1 DATABAR EXPANDED OFF 4.1.50 SP-7260 Multi Function POS...
  • Page 45 APPENDIX 4.1.51 G GS1 DATA ABAR LIM MITED ON 4.1.51 4.1.52 G GS1 DATA ABAR LIM MITED OFF 4.1.52 SP-72 260 Multi Fun nction POS...
  • Page 46 CAN COD DE 4.2.1~ 4.2.33) ENGTH (SCA AN CODE 4.2.15 ~ ~ 4.2.28) SAVE AND EXI 4.2.1 SE ET MIN. L LENGTH C CODE128 4.2.1 4.2.2 SE ET MIN. L LENGTH C CODE39 4.2.2 SP-7260 M Multi Function n POS...
  • Page 47 APPENDIX 4.2.3 SE ET MIN. L LENGTH C CODABAR 4.2.3 4.2.4 SE ET MIN. L LENGTH I NTERLEAV AVED 2/5 4.2.4 SP-72 260 Multi Fun nction POS...
  • Page 48 APPEND 4.2.32 S SET MIN. LENGTH MSI Pless 4.2.32 4.2.33 S SET MIN. LENGTH CODE93 4.2.33 SP-7260 M Multi Function n POS...
  • Page 49 APPENDIX 4.2.15 L LENGTH = 4.2.15 4.2.16 L LENGTH = 4.2.16 SP-72 260 Multi Fun nction POS...
  • Page 50 APPEND 4.2.17 L LENGTH = 4.2.17 4.2.18 L LENGTH = 4.2.18 SP-7260 M Multi Function n POS...
  • Page 51 APPENDIX 4.2.19 L LENGTH = 4.2.19 4.2.20 L LENGTH = 4.2.20 SP-72 260 Multi Fun nction POS...
  • Page 52 APPEND 4.2.21 L LENGTH = 4.2.21 4.2.22 L LENGTH = = 10 4.2.22 SP-7260 M Multi Function n POS...
  • Page 53 APPENDIX 4.2.23 L LENGTH = = 11 4.2.23 4.2.24 L LENGTH = = 12 4.2.24 SP-72 260 Multi Fun nction POS...
  • Page 54 APPEND 4.2.25 L LENGTH = 4.2.25 4.2.26 L LENGTH = = 14 4.2.26 SP-7260 M Multi Function n POS...
  • Page 55 APPENDIX 4.2.27 L LENGTH = = 15 4.2.27 4.2.28 L LENGTH = = 16 4.2.28 SP-72 260 Multi Fun nction POS...
  • Page 56 APPEND panese b book cod 4.3.1 DI ISABLE 9 78/192 JA APANESE E BOOK C ODE(DEF FAULT) 4.3.1 4.3.2 EN NABLE 97 78/192 JA APANESE BOOK CO 4.3.2 SP-7260 M Multi Function n POS...
  • Page 57 APPENDIX 4.3.5 EN NABLE JA PANESE B BOOK CO ODE SEPA RATOR (D DEFAULT) 4.3.5 4.3.6 DI ISABLE JA APANESE BOOK CO ODE SEPA ARATOR 4.3.6 SP-72 260 Multi Fun nction POS...
  • Page 58 APPENDIX 4.3.7 OPEN PROGRAMMING JAPANESE BOOK CODE SEPARATOR (ONE CHARACTER) 4.3.7 Note: Only one separator is available. To set Japanese book code separator, scan: 1.1→4.3.7→ASCII code→1.1 SP-7260 Multi Function POS...

  • Page 59: Data Formatting

    To send a <STX> in front of the bar code, scan successively (while in Programming Mode) 5.1.1 Free programmable preambles : Open Programming mode 10.1.2 <STX> 5.1.2 Free programmable preambles : Close programming mode with update As a result, the scanner will give the following bar code data output: SP-7260 Multi Function POS...
  • Page 60 SAVE AND EXIT MOREPREAMBLE CHARACTERS TO BE PROGRAMMED? SAVE PROGRAMMED DATA? CLOSE PROGRAMMING FREE CLOSE PROGRAMMING MODE PROGRAMMABLE FREE PROGRAMMABLE PREAMBLES WITHOUT PREAMBLES UPDATE (SCAN CODE 5.1.1) WITH UPDATE (SCAN CODE 5.1.2) EXIT SAVE AND EXIT SP-7260 Multi Function POS...
  • Page 61 APPENDIX 5.1.1 FREE PROGRAMMABLE PREAMBLES: OPEN PROGRAMMING MODE / CLOSE PROGRAMMING MODE WITHOUT UPDATE 5.1.1 5.1.2 FREE PROGRAMMABLE PREAMBLES: CLOSE PROGRAMMING MODE WITH UPDATE 5.1.2 SP-7260 Multi Function POS...
  • Page 62 To send a <ETX>after of the bar code, scan successively (while in Programming Mode) 5.2.5 Free programmable preambles : Open Programming mode 10.1.2 <ETX> 5.1.2 Free programmable preambles : Close programming mode with update As a result, the scanner will give the following bar code data output: SP-7260 Multi Function POS...
  • Page 63 SAVE AND EXIT MOREPREAMBLE CHARACTERS TO BE PROGRAMMED? SAVE PROGRAMMED DATA? CLOSE PROGRAMMING FREE CLOSE PROGRAMMING MODE PROGRAMMABLE FREE PROGRAMMABLE PREAMBLES WITHOUT PREAMBLES UPDATE (SCAN CODE 5.2.5) WITH UPDATE (SCAN CODE 5.2.6) EXIT SAVE AND EXIT SP-7260 Multi Function POS...
  • Page 64 APPENDIX 5.2.1 PREDEFINED POSTAMBLE = CR(DEFAULT) 5.2.1 5.2.2 PREDEFINED POSTAMBLE = LF 5.2.2 SP-7260 Multi Function POS...
  • Page 65 APPENDIX 5.2.3 PREDEFINED POSTAMBLE = CR + LF 5.2.3 5.2.5 FREE PROGRAMMABLE POSTAMBLES: OPEN PROGRAMMING MODE / CLOSE PROGRAMMING MODE WITHOUT UPDATE 5.2.5 SP-7260 Multi Function POS...
  • Page 66 D1 - D42 (alphanumeric) Important: Please note that the UPCE format will be changed. The scanner will transmit UPCE codes with leading zero and without check digit. To return to default format without code identifiers scan code 5.3.2. SP-7260 Multi Function POS...
  • Page 67 APPENDIX 5.3.1 SET MESSAGE FORMAT WITH CODE IDENTIFIERS 5.3.1 5.3.2 SET MESSAGE FORMAT WITHOUT CODE IDENTIFIERS 5.3.2 SP-7260 Multi Function POS...
  • Page 68 Code 128 EAN 128 Null(none) Code 39 Code 32 ITF 25 Codabar Code 93 & MSI/PLESSY DataBar Omni-directional DataBar Limted DataBar Expanded Note: Scan code 5.3.4 for Datalogic version. *Datalogic is the trade mark of Datalogic S.p.A. SP-7260 Multi Function POS...
  • Page 69 APPENDIX 5.3.3 DE EFAULT C CODE IDE NTIFIER 5.3.3 5.3.4 DA ATALOGIC C CODE I DENTIFIE 5.3.4 SP-72 260 Multi Fun nction POS...
  • Page 70 0.1.34 ~ 10.1.127 EXIT T PROGRA AMMING I IDENTIFI ER WITH UPDATE (SCAN C CODE 5.3 .20) SAVE AND EXI 5.3.10 S SETTING IDENTIFI IER EAN1 5.3.3 5.3.11 S SETTING IDENTIFI IER EAN8 5.3.4 SP-7260 M Multi Function n POS...
  • Page 71 APPENDIX 5.3.12 S SETTING IDENTIFI IER UPCA 5.3.12 5.3.13 S SETTING IDENTIFI IER UPCE 5.3.13 SP-72 260 Multi Fun nction POS...
  • Page 72 APPEND 5.3.14 S SETTING IDENTIFI IER EAN1 5.3.14 5.3.15 S SETTING IDENTIFI IER CODE E128 5.3.15 SP-7260 M Multi Function n POS...
  • Page 73 APPENDIX 5.3.16 S SETTING IDENTIFI IER CODE 5.3.16 5.3.17 S SETTING IDENTIFI IER CODE 5.3.17 SP-72 260 Multi Fun nction POS...
  • Page 74 APPEND 5.3.18 S SETTING IDENTIFI IER CODA ABAR 5.3.18 5.3.19 S SETTING IDENTIFI IER INTER RLEAVED 5.3.19 SP-7260 M Multi Function n POS...

  • Page 75: Ssetting Identifi Ier Code

    APPENDIX 5.3.27 SETTING G IDENTIF FIER MSI/ /PLESEY 5.3.27 5.3.28 S SETTING IDENTIFI IER CODE 5.3.28 SP-72 260 Multi Fun nction POS...
  • Page 76 APPEND 5.3.20 E EXIT PROG GRAMMIN NG FREE PROGRAM MMABLE I IDENTIFI ER WITH UPDATE 5.3.20 5.3.21 E EXIT PRO GRAMMIN NG FREE PROGRAM MMABLE I IDENTIFI ER WITH UPDATE 5.3.21 SP-7260 M Multi Function n POS...
  • Page 77 APPENDIX 5.4 Cod de repre esentati 5.4.3 U UPCA FOR RMAT TRA ANSMITTE ED AS UP CA (12 D IGITS) 5.4.3 5.4.4 UP PCA FORM MAT TRAN NSMITTED D AS EAN N13 (WITH H LEADIN NG ZERO) 5.4.4 SP-72 260 Multi Fun nction POS...
  • Page 78 APPEND 5.4.5 UP PCA FORM MAT UPCE E TO UPCA A EXPANS SION ON 5.4.5 5.4.6 UP PCA FORM MAT UPCE E TO UPCA A EXPANS SION OFF F 5.4.6 SP-7260 M Multi Function n POS...
  • Page 79 APPENDIX 5.4.7 UPCE FORMAT WITH LEADING ZERO 5.4.7 5.4.8 UPCE FORMAT WITHOUT LEADING ZERO 5.4.8 SP-7260 Multi Function POS...
  • Page 80 APPENDIX 5.4.9 UPCE FORMAT WITH CHECK DIGIT 5.4.9 5.4.10 UPCE FORMAT WITHOUT CHECK DIGIT 5.4.10 SP-7260 Multi Function POS...
  • Page 81 APPENDIX 5.4.15 EAN 128 CODE INDENTIFIER ]C1 ON 5.4.15 5.4.16 EAN 128 CODE INDENTIFIER ]C1 OFF 5.4.16 SP-7260 Multi Function POS...
  • Page 82 APPEND 5.4.24 T TRANSMIT T EAN8 C CHECKDIG GIT ON 5.4.24 5.4.25 T TRANSMIT T EAN8 C CHECKDIG GIT OFF 5.4.25 SP-7260 M Multi Function n POS...
  • Page 83 APPENDIX 5.4.26 T TRANSMIT T EAN13 CHECKDI IGIT ON 5.4.26 5.4.27 T TRANSMIT T EAN13 CHECKDI IGIT OFF 5.4.27 SP-72 260 Multi Fun nction POS...
  • Page 84 APPEND 5.4.28 T TRANSMIT T UOCA C CHECKDIG GIT ON 5.4.28 5.4.29 T TRANSMIT T UPCA C CHECKDIG GIT OFF 5.4.29 SP-7260 M Multi Function n POS...
  • Page 85 APPENDIX 5.4.30 E EXPAND E EAN8 TO UPCA ON 5.4.30 5.4.31 E EXPAND E EAN8 TO UPCA O 5.4.31 SP-72 260 Multi Fun nction POS...
  • Page 86 APPEND 5.4.32 T TRANSMIT T FIRST D DIGIT UPC CA OFF 5.4.32 5.4.33 T TRANSMIT T FIRST D DIGIT UPC CA ON 5.4.33 SP-7260 M Multi Function n POS...
  • Page 87 APPENDIX 5.4.34 T TRANSMIS SSION OF F THE CH HECK CHA ARACTER AT CODE E39 OFF 5.4.34 5.4.35 T TRANSMIS SSION OF F THE CH HECK CHA ARACTER AT CODE E39 ON 5.4.35 SP-72 260 Multi Fun nction POS...
  • Page 88 APPEND 5.4.36 V VERIFICAT TION OF THE CHE ECK CHAR RACTER A AT CODE3 39 OFF 5.4.36 5.4.37 V VERIFICAT TION OF THE CHE ECK CHAR RACTER A AT CODE3 39 ON 5.4.37 SP-7260 M Multi Function n POS...
  • Page 89 APPENDIX 5.4.38 T TRANSMIS SSION OF F THE CH HECK CHA ARACTER AT CODA ABAR OFF 5.4.38 5.4.39 T TRANSMIS SSION OF F THE CH HECK CHA ARACTER AT CODA ABAR ON 5.4.39 SP-72 260 Multi Fun nction POS...
  • Page 90 APPEND 5.4.40 V VERIFICAT TION OF THE CHE ECK CHAR RACTER A AT CODAB BAR OFF 5.4.40 5.4.41 V VERIFICAT TION OF THE CHE ECK CHAR RACTER A AT CODAB BAR ON 5.4.41 SP-7260 M Multi Function n POS...
  • Page 91 APPENDIX 5.4.42 T TRANSMIS SSION OF F THE CH HECK DIG IT AT INT TERLEAVE ED 2/5 OF 5.4.42 5.4.43 T TRANSMIS SSION OF F THE CH HECK DIG IT AT INT TERLEAVE ED 2/5 ON 5.4.43 SP-72 260 Multi Fun nction POS...
  • Page 92 5.4.44 V VERIFICAT TION OF THE CHE ECK DIGIT T AT INTE ERLEAVED D 2/5 OFF 5.4.44 5.4.45 V VERIFICAT TION OF THE CHE ECK DIGIT T AT INTE ERLEAVED D 2/5 ON 5.4.45 SP-7260 M Multi Function n POS...
  • Page 93 APPENDIX 5.4.46 V VERIFICAT TION MS I/PLESSE EY CHECK K DIGIT O 5.4.46 5.4.51 V VERIFICAT TION MS I/PLESSE EY CHECK K DIGIT O 5.4.51 SP-72 260 Multi Fun nction POS...
  • Page 94 APPEND 5.4.54 T TRANSMIS SSION OF F THE CH HECK DIG IT AT ISB BN OFF 5.4.54 5.4.55 T TRANSMIS SSION OF F THE CH HECK DIG IT AT ISB BN ON 5.4.55 SP-7260 M Multi Function n POS...
  • Page 95 APPENDIX 5.8.22 D DO NOT T TRANSMIT T START/ /STOP AT CODE39 5.8.22 5.8.23 T TRANSMIT T START/ /STOP AT CODE39 5.8.23 SP-72 260 Multi Fun nction POS...
  • Page 96 APPEND 5.8.24 D DO NOT T TRANSMIT T START/ / STOP CO ODABAR 5.8.24 SP-7260 M Multi Function n POS...
  • Page 97 APPENDIX B. Predefined ASCII characters 10.1.1 SOH 10.1.1 10.1.2 STX 10.1.2 SP-7260 Multi Function POS...
  • Page 98 APPENDIX 10.1.3 ETX 10.1.3 10.1.4 EOT 10.1.4 SP-7260 Multi Function POS...
  • Page 99 C. Special keys On the following pages you find some special key programming bar codes, related to KBW communication. These codes are also applicable in USB interface with USB keyboard emulation. 6.1.30 TAB 6.1.30 6.1.31 ENTER (ALPHANUMERIC) 6.1.31 SP-7260 Multi Function POS...
  • Page 100 APPENDIX 6.1.32 ENTER (NUMERIC) 6.1.32 SP-7260 Multi Function POS...

This manual is also suitable for:

Sp-7262

Table of Contents