Advertisement
QuickSpecs
Standard Features
improvements and enhanced functionality listed in this document for Gen9. For additional
information, please see the HPE SmartMemory QuickSpecs.
NOTE: LRDIMM and RDIMM are distinct memory technologies and cannot be mixed within a
server.
NOTE: Depending on the memory configuration and processor model, the memory speed may run
at 2133, 1866MHz, 1600MHz. Please see Memory Population Table below or the Online Memory
Configuration Tool.
Memory
Advanced ECC
Protection
Online spare
Mirroring mode
Demand and Patrol
Scrubbing
Failed DIMM Isolation
Data Bus ECC Protection
Memory Thermal Control
Memory Mirroring Inter-
Socket
Network
The HPE ProLiant DL560 Gen9 servers offer a flexible network technology - FlexibleLOMs, which offers
Controller
customers a choice of 1Gb, 10Gb, or 10Gb base-T Ethernet or converged networking in their embedded
adapter. A range of NIC cards are also available to enhance networking capabilities.
NOTE: For additional details see the Networking Section of this document.
Model
Entry Model
Base Model
Performance Model
Expansion Slots
Primary Riser
Expansio
(Standard)
n Slots #
1
2
Advanced ECC uses single device data correction to detect and correct
single and all multibit error that occurs within a single DRAM chip.
Memory online spare mode detects a rank that is degrading and switches
operation to the spare rank.
Memory mirroring inter-socket stores a copy of memory with dynamic
failover in case of failure. Once a DIMM in a mirrored set is detected as
failed, the mirror failover uses its mirrored DIMM.
Memory demand and patrol scrubbing prevent accumulation of correctable
errors and reduces the likelihood of unplanned downtime.
Failed DIMM isolation improves the service time thus improving the overall
system availability.
Data Bus ECC protection provides automatic correction from a single data
bit error and detection of double data error bits. Often called single error
correction/double error detection (SEC/DED).
Memory thermal control is used to prevent DIMMs from overheating.
Achieved by slowing down the memory access rate per the temperature
monitored by DIMM sensor.
Memory mirroring inter-socket stores a copy of memory with dynamic
failover in case of failure. Once a DIMM in a mirrored set is detected as
failed, the mirror failover uses its mirrored DIMM.
Adapter
HPE Ethernet 1Gb 4-port 331FLR Adapter
HPE FlexFabric 10Gb 2P 533FLR-T Adapter
HPE FlexFabric 10Gb 2P 533FLR-T Adapter
Technology
Bus
Connector
Width
PCIe 3.0
x8
x16
PCIe 3.0
x8
x16
HPE ProLiant DL560 Generation9 (Gen9)
Bus
Width
Number
7
Half Length/Full
Height
10
Half Length/Full
Height
Form Factor
Notes
Proc 1
Proc 1
Page 4
Advertisement
