Advertisement
QuickSpecs
Configuration Information - Factory Integrated Models
HPE Processors
Select one or two processors from Core options-Processor section below,
•
•
•
•
For the Intel® C600 Chipset E5-2600 Series, the letter preceding the model number indicates the Product
Line (E3, E5, E7); 2600x v#, 2 = number of CPUs in a Node, 6 is socket/segment designation, 00 =
Processor SKU, x = L for low power SKUs and v# (not yet designated) = version number.
HPE Memory
Select one or more memory from Core options-Memory section below,
•
•
•
•
•
HPE Power
Select one or more power supplies from Core Options-Power Supplies section below:
Supplies
•
•
Step 3: Choose Additional Factory Integratable Options
HPE Unique
Select one or more Unique options from Core options section below.
Options
•
•
HPE I/O Expansion
Select one or more Riser Kit options from Core options section below.
Options
•
If one processor is desired, select one xxxxxx-L21
If two processors are desired, select one xxxxxx-L21 and one xxxxxx-B21.
Up to 2 processors supported. Mixing different processor models is not supported.
DDR4 speed is the maximum memory speed of the processor. Actual memory speed may depend
on the quantity and type of DIMMs installed.
LRDIMM, RDIMM are all distinct memory technologies and cannot be mixed within a server. The
majority of ProLiant Gen9 servers support LRDIMM and RDIMM.
HPE memory from previous generation servers are not qualified or warranted with this HPE
ProLiant Server. HPE SmartMemory is required to realize the memory performance
improvements and enhanced functionality listed in this document for Gen9.
If only one processor is installed, only half of the total DIMM slots are available. When populating
with two processors all DIMM slots are available.
Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy
Efficient Features, see: http://www.hp.com/go/proliant-energy-efficient.
Depending on the memory configuration and processor model, the memory speed may run at
2133MHz, 1866MHz, 1600MHz or 1333MHz. Please see Memory Population Table or the Online
Memory Configuration Tool at:http://www.hp.com/go/ddr4config.
Prior to selecting a power supply option, it is highly recommended that you review your server
configuration in the HPE Power Advisor tool to determine the right size power supply for your
server configuration. The HPE Power Advisor is located
at: http://www.hp.com/go/hppoweradvisor.
Mixing of power supplies in the same server is not supported. All power supplies must be of the
same input voltage, output rating, and efficiency rating. If non-matching power supplies are
installed, you may receive an error message and/or experience operational issues with your
server.
This section may contain FIO options, please see the Unique options section below.
FIO indicates that this option is only available as a factory installable option.
To take advantage of the additional PCI slot upgrade, the second processor must be installed.
HPE ProLiant DL560 Generation9 (Gen9)
Page 19
Advertisement
