www.aeroplusrc.com
Set‐up
We highly recommend the use of both dual rates and exponential. This will allow the
model to fly both precision and 3D at the flick of a switch.
Low Rates
Elevator
15‐20 deg
Ailerons
15‐20 deg
Rudder
25‐30 deg
For test flights always use low rates, remember that + and – exponential is different per
manufacturer, check your TX manual.
Always check the range on your model before the maiden flight. Carry out a short flight
then go over everything to make sure nothing has come loose.
CG Location
We suggest for initial test flights set the CG 100mm or 4 inches from the leading edge of the
wing.
Adjust after first flights to personal preference.
Exponential High Rate
15‐20 %
15‐20 %
15‐20 %
AeroPlus RC Copyright 2013 © All Rights Reserved
service@aeroplusrc.com
Exponential
35‐45 deg
35‐45 deg
35‐45 deg
45‐60 %
45‐60 %
45‐60 %