Typical Characteristics; Table 7: Typical Characteristics - Signal Acquisition System - Tektronix ADA400A Instruction Manual

Specifications
Table 6: Warranted Characteristics — Environmental (Cont.)
Name
Electromagnetic Compatibility (EMC)

Typical Characteristics

Table 7: Typical Characteristics — Signal Acquisition System
Name
Input Capacitance
Analog Bandwidth Selection Accuracy
Linearity
Lower Frequency Limit, AC Coupled
Harmonic Distortion
Recovery Time
24
Description
Emissions:
Meets or exceeds the requirements of the following standards:
EN 55022 Class B limits for radiated emissions when operated as a
system with a TDS460 series oscilloscope (FCC 47 CFR, Part 15,
Subpart B for Class A equipment.)
ADA400A Settings: Gain=100; Offset=off; DC coupled; Filter=1 MHz
TDS 460 Settings: 500 ns/div; 5 mV/div; DC coupled
Immunity: Immunity:
Radio Frequency Electromagnetic Field
less than ±2 divisions of leakage signal when the instrument is subjected
to a 3 V/M electromagnetic field over the frequency range of 27 MHz to
500 MHz.
Electrostatic Discharge (ESD)
Up to 8 kV with no change to control settings of impairment of normal
operation, and up to 15 kV with no loss of stored data or damage that
prevents recovery of normal operation by the user.
Typical characteristics are described in terms of typical or average performance.
Typical characteristics are not warranted.
Description
55 pF ± 20%
± 12% for 100 Hz, 3 kHz, 100 kHz selections
≥ 1 MHz for the FULL (1 MHz) selection
± 0.01% of linear dynamic range
≤ 2 Hz (lower - - 3 dB frequency)
≤ 0.002% measured using 3 V
≤ 1.5 s to recover to within 0.5% of zero level after over driving the amplifier
by ± 150%
output at 100 Hz and 1 kHz
RMS
ADA400A Differential Preamplifier