Table of Contents
Advertisement
DVD-S530/DV-S5550
5. Basic Engine
5.1 Version Number
In the basic engine tests, the version number of the Basic
Engine will be shown first, as the following example:
By pressing the PLAY key, the Basic Engine tests are
started.
5.2 Tray Test
First, the tray is tested. The purpose of this test is also to
give the user the opportunity to put a disc in the tray of the
DVD player. Some tests on the Basic Engine require that a
disc (e.g. DVD MPTD test disc) is present in the player. At
the end of the Basic Engine tests this tray test will be
repeated solely to enable the user to remove the disc in
the tray.
The local display will look as follows:
By pressing OPEN/CLOSE the user can toggle the
position of the tray. Note that this test will not contribute to
the test result of the Basic Engine. Pressing PLAY will
proceed to the next test. At this point, the tray will be
closed automatically by the software if it was open.
5.3 Sledge Test (Visual Test)
The second Basic Engine test tests the sledge. The user
can move the sledge as many times as desired by using
OPEN/CLOSE (nucleus BeSledgeOut) and STOP
(nucleus BeSledgeIn). Pressing PLAY on the local
keyboard proceeds to the next test. Note that this test will
not contribute to the test result of the Basic Engine.
The local display will look as follows during the sledge test:
5.4 Disc Motor Test (Visual Test)
The third Basic Engine test tests the disc motor (nucleus
BeDiscMotorOn).
The local display looks as follows:
16
Fig. 22
Fig. 23
Fig. 24
Fig. 25
By pressing OPEN/CLOSE the user confirms that the disc
motor is running. Pressing STOP indicates the disc motor
does not work. Pressing PLAY proceeds to the next test,
after a reset of the disc motor (nucleus BeDiscMotorOff). If
the user presses PLAY before pressing OPEN/CLOSE or
STOP, the result of this test will be TRUE (disc motor is
running).
5.5 Focus Test (Visual Test)
The fourth Basic Engine test tests the focusing. First
focusing is turned on by calling nucleus BeFocusOn.
The display will look as follows:
Fig. 26
By pressing OPEN/CLOSE the user confirms that the
focusing was succesful. Pressing STOP indicates a
focusing failure. Pressing PLAY proceeds to the next test
after a reset of the focusing (nucleus BeFocusOff). If
PLAY is pressed before OPEN/CLOSE or STOP, the
result of this test will be TRUE (focus successful).
5.6 Radial Test (Visual & Listening Test)
The fifth Basic Engine test tests the radial functionality
(nucleus BeRadialOn).
The local display looks as follows:
Fig. 27
By pressing OPEN/CLOSE the user confirms that the
radial function works.Pressing STOP indicates the
function does not work. Pressing PLAY proceeds to the
next test, after a reset of the radial (nucleus BeRadialOff).
If the user presses PLAY before pressing OPEN/CLOSE
or STOP, the result of this test will be TRUE (radial
successful).
5.7 Jump Test (Listening Test)
The sixth and last Basic Engine test tests the jumping by
calling nuclei BeGroovesIn, BeGroovesMid and
BeGroovesOut.
During this test, the local display looks as follows:
Fig. 28
The user can switch between the three different types of
groove settings by pressing OPEN/CLOSE (forward to
next nucleus in the list In-Mid-Out), or STOP (backward in
the list In-Mid-Out). This is done in a cyclic manner; note
Hide quick links:
Advertisement
Table of Contents
