1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. DVD Player
  5. DVD-S510
  6. Service manual

Yamaha DVD-S510 Service Manual

Hide thumbs Also See for DVD-S510:
Table of Contents

Advertisement

Quick Links

See also: Owner's Manual
DVD-S510/DV-S5350
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already
known and understood by the users, and have therefore not been restated.
WARNING:
IMPORTANT:
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and
service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable
and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please
contact the distributor's Service Division.
WARNING:
IMPORTANT:
CONTENTS
WARNINGS ................................................................
LOCALE MANAGEMENT INFORMATION ...................
FRONT PANELS ............................................................
REMOTE CONTROL TRANSMITTER ..........................
.............................................................. 5
.......................................................... 6
............................................................ 8
..................................... 9~10
1 0 0 7 5 0
Failure to follow appropriate service and safety procedures when servicing this product may result in personal
injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons,
we advise all YAMAHA product owners that any service required should be performed by an authorized
YAMAHA Retailer or the appointed service representative.
The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.
.......................................... 1
1~2
3
3
4
4
............................... 7~8

DVD PLAYER

SERVICE MANUAL
IMPORTANT NOTICE
........................................... 11~17
........................................... 20~25
................................................ 29~39
................................................ 40~41
................................................. 42~45
......................................................... 96~107
DVD-S510/DV-S5350
18~19
26~27
......................................... 28
.................................. 46~66
........................................ 67~95
P.O.Box 1, Hamamatsu, Japan

Advertisement

Table of Contents
loading

Related Manuals for Yamaha DVD-S510

Summary of Contents for Yamaha DVD-S510

  • Page 1: Table Of Contents

    This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already known and understood by the users, and have therefore not been restated.

  • Page 2: To Service Personnel

    DVD-S510/DV-S5350 TO SERVICE PERSONNEL 1. Critical Components Information AC LEAKAGE Components having special characteristics are marked s WALL EQUIPMENT TESTER OR and must be replaced with parts having specifications equal OUTLET UNDER TEST EQUIVALENT to those originally installed. 2. Leakage Current Measurement (For 120V Models Only)
  • Page 3 DVD-S510/DV-S5350 Laser Diode Properties Type: Semiconductor laser GaAlAs Wave length: 650 nm (DVD) 780 nm (VCD/CD) Output Power: 7 mW (DVD) 10 mW (VCD/CD) Beam divergence: 60 degree Output value is determined by CFR CHAPTER1, SUBCHAPTER J VARO! : AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA NÄkymÄTTÖMÄLLE LASER- SÄTEILYLLE.

  • Page 4: Prevention Of Electrostatic Discharge

    DVD-S510/DV-S5350 PREVENTION OF ELECTROSTATIC DISCHARGE Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor “chip” components. The following techniques should be used to help reduce the incidence of component damage caused by electro static discharge (ESD).

  • Page 5: Front Panels

    DVD-S510/DV-S5350 FRONT PANELS DVD-S510 DV-S5350 REMOTE CONTROL TRANSMITTER...

  • Page 6: Rear Panels

    DVD-S510/DV-S5350 REAR PANELS DVD-S510 U, C models DVD-S510 A model DVD-S510 B, G models DVD-S510 R model DVD-S510 T model DV-S5350 U model...

  • Page 7: Specifications

    DVD-S510/DV-S5350 SPECIFICATIONS Video Output Cinch (yellow) (B, G) PLAYBACK SYSTEM Video Output Cinch (yellow) x2 (U, C, A, R, T) DVD-Video Audio L+R output Cinch (white/red) (B, G) Video CD Audio L+R output Cinch (white/red) x2 (U, C, A, R, T)

  • Page 8: Disassembly Procedures

    DVD-S510/DV-S5350 TruSurround and the SRS symbol are trademarks of This product incorporates copyright protection S R S L a b s . , I n c . T r u S u r r o u n d t e c h n o l o g y i s technology that is protected by method claims of manufactured under license from SRS Labs., Inc.

  • Page 9: Service Hints

    DVD-S510/DV-S5350 The way to remove tray 1. Push left end of the lever under the tray toward the right by using screwdriver, move the tray by pulling it forward. (Fig. 1) 2. While lifting up the lever (1), move the left side of the tray by pulling it forward (2).
  • Page 10 DVD-S510/DV-S5350 DIAGNOSTIC SOFTWARE : SCRIPT INTERFACES 1. DEALER SCRIPT 1.2 Contents of Dealer Script 1.1 Purpose of Dealer Script The dealer script executes all diagnostic nuclei that do not The dealer script can give a diagnosis on a standalone need any user interaction and are meaningful on a DVD player;...
  • Page 11 DVD-S510/DV-S5350 2. PLAYER SCRIPT 2.4 Survey 2.1 Purpose of Player Script The Player script will give the opportunity to perform a test Press 2 keys simultaneously that will determine which of the DVD player's modules are <OPEN/CLOSE> + <STOP> faulty, to read the error log and error bits and to perform an Connect to mains endurance loop test.

  • Page 12: Interactive Tests

    DVD-S510/DV-S5350 INTERACTIVE TESTS 1. DISPLAY PCB 1.1 DISPLAY TEST key id. The display test is performed by nucleus DispDisplay. By PLAY putting a series of test patterns on the local display, the NEXT local display is tested. To step through all different...
  • Page 13 DVD-S510/DV-S5350 In this example 23 is the hexidecimal code of the pressed RC After pressing NEXT, the result of the remote control test key. The user can leave the remote-control test by pressing is displayed on the local display of the DVD player as NEXT on the local keyboard of the DVD player.
  • Page 14 DVD-S510/DV-S5350 3 BASIC ENGINE note) Basic engine means DVD mechanism. 3.1 VERSION NUMBER In the basic engine tests, the version number of the Basic Engine will be shown first, as the following example: Figure 12 On the TV screen, a colour bar (generated by nucleus VideoColDencOn) is visual and the internally generated pinknoise is audible.
  • Page 15 DVD-S510/DV-S5350 Figure 18 Figure 21 By pressing PLAY, the user confirms that the disc motor is running; pressing PAUSE indicates the disc motor does The user can switch between the three different types of not work. Pressing NEXT proceeds to the next test, after a groove settings by pressing PLAY (forward to next reset of the disc motor (nucleus BeDiscMotorOff).

  • Page 16: Player Script

    DVD-S510/DV-S5350 3.9 ERROR LOG The errorcode with the lowest highlighted number is the Reading the error log and error bits information can be most recent. By pressing NEXT on the local keyboard, the useful to determine any errors that occurred recently user can proceed to the next test.
  • Page 17 DVD-S510/DV-S5350 4. LOOP TEST The loop test will perform the same nuclei as the dealer At the start of the loop test, the display will show the result test, but it will loop through the list of nuclei indefinitely. of the interactive player test:...
  • Page 18 DVD-S510/DV-S5350 5. Servicing DVD module and MONO board 5.1 Reset of Virgin Mode After the player has been powered up for test by the dealer, it would have gone through the Virgin Mode. It is possible to reset the settings made during that mode before the delivery of player to the customer.

  • Page 19: Test Instructions Display Board

    DVD-S510/DV-S5350 TEST INSTRUCTIONS DISPLAY BOARD 1. Display board 1.3 Reset 1.1 Introduction Check next reset timing with an oscilloscope at pin 10 of These test instructions are written for all versions of the the microprocessor. display PCB. PM3392A The contents of the PCB can be split up into next blocks:...
  • Page 20 DVD-S510/DV-S5350 1.5 Key-matrix 1.8 P50 interface Connect a extra 10kpull-up resistor to pin 36 en 37 of the P50 is a bi-directional serial interface, which is used for µP and check next matrix scanning at these pins. communication between video equipment. For European sets, this communication goes via pin 10 of the scart-bus.

  • Page 21: Troubleshooting

    DVD-S510/DV-S5350 TROUBLESHOOTING Display board Check supply voltages NO DISC The display pcb uses a 24V stabiliser(7112) in combination with a 10V zener diode(6102). POWER ON Check input voltage: at connector 1115-4: -40V 5% Check output voltage at anode of Diode 6102:...
  • Page 22 DVD-S510/DV-S5350 A/V board (B, G models) Testing of A/ V board can be done using diagnostic software “Player script”. Mono board is used to generate a sinus with the soundtest SND- 2 or a VIDEO signal with the picture test PIC- 1.
  • Page 23 DVD-S510/DV-S5350 NO SOUND ON TV- & AUX-SCART To put set in “Player script”, press keys Diagnostic Software STOP+OPEN/CLOSE simultaneously and connect to APP SND-2 mains. Proceed until display shows “ ”. APP SND-2 Check OPAMP 7403 AUDIO TP14? Check supply voltage of IC7917(D6401)
  • Page 24 DVD-S510/DV-S5350 VIDEO PART NO PICT CVBS & Y/C OUT To put set in “Player script”, press keys Diagnostic Software STOP+OPEN/CLOSE simultaneously and connect to APP PIC-1 APP PIC-1 mains. Proceed until display shows “ ”. Check supply voltages +8Vstby, –8Vstby, +12Vstby, +6V,...

  • Page 25: Previous

    DVD-S510/DV-S5350 NO PICTURE SCART SCART SWITCHING To put set in “Player script”, press keys Diagnostic Software STOP+OPEN/CLOSE simultaneously and connect to SCART DVD mains. Proceed until display shows “ ”. SCART DVD Check “0/6/12” on connector 1300-8 = +10V Check flex connection to mono board PICTURE TV? Check “SELECT”...
  • Page 26 DVD-S510/DV-S5350 PM3392A PM3392A PM3392A 1 V~ MTB 500us ch1+ 2 V~ MTB10.0us ch1+ 200mV~ MTB20.0us ch1+ TP8: LRCK TP 15 : AUDIO SCART SWITCH OUTPUT TP 1 : video B PM3392A PM3392A PM3392A 2 V~ MTB50.0ms ch1+ 2 V~ MTB 100ns...

  • Page 27: Technical Specifications Dvd Module

    DVD-S510/DV-S5350 TECHNICAL SPECIFICATIONS DVD MODULE 1.4 Connector 1501 : I2C interface connector. 1. Connections 1. I2C clock 1.1 Connector 1600 : Supply input connector. 2. GND 1. +3.3Vstby 3. I2C data 2. +3.3Vstby 4. Standby control line 3. +5V 5. P50 4.
  • Page 28 DVD-S510/DV-S5350 3.2 I2S output I2S systemclock : 256xFS audio systemclock. Accuracy : Up to 24bit. : Level H/L Sample rate : 44.1kHz / 48kHz. Kar_bypass : Bypasses the karaoke Standard : Philips I2S output chip on the A/V board. Number of I2S outputs...

  • Page 29: List Of Abbreviations

    DVD-S510/DV-S5350 LIST OF ABBREVIATIONS Buffered Video input Blue from DVD Y_ENC Buffered Luma input from DVD monoboard monoboard BC_AUX Blue or Chroma input from AUX- YCVBSIN_AUX Luma or CVBS input from AUX-scart scart YCVBSIN_TV Luma or CVBS input from TV-scart...

  • Page 30: Ic Descriptions

    DVD-S510/DV-S5350 IC DESCRIPTIONS TZA1033 DVDALAS2plus Advanced Analog DVD Signal Processor and Laser Supply Diode Amplifiers Balanced Processing Data & header Interface Header Land Servo Signals Push Pull Land/Groove D1-D6 Swap Offset Mute compensations 3 Beam Tracking V & I references...
  • Page 31 DVD-S510/DV-S5350 TZA1033 DVDALAS2plus Advanced Analog DVD Signal Processor and Laser Supply CD-A CD-B CD-C CD-D CD-REF VDDA4 CD-E VSSA4 CD-F VDDA1 VSSA1 O-CENTRAL DVD-MI LPF-DPD2 LPF-DPD1 DVD-A DVD-B FTC-REF DVD-C DVD-D DVD-REF MXXxxx Pin description Name Description CD-A CD pick up input A...
  • Page 32 DVD-S510/DV-S5350 TZA1033 DVDALAS2plus Advanced Analog DVD Signal Processor and Laser Supply Name Description O-central Test pin for offset cancelation Internally connected FTC-ref Servo output voltage reference input Servo current output for radial tracking Servo current output for radial tracking Internally connected Fast track count voltage output pos.
  • Page 33 DVD-S510/DV-S5350 BA6856FP 3 Phase motor driver for DVD players DRIVER GAIN CONTROL H BIAS...
  • Page 34 DVD-S510/DV-S5350 BA6856FP 3 Phase motor driver for DVD players Pin description PIN No PIN NAME DESCRIPTION N.C. Not connected N.C. Not connected Output 3 for motor N.C. Not connected Output 2 for motor N.C. Not connected Output 1 for motor Ground Hall input Amp1.
  • Page 35 DVD-S510/DV-S5350 SAA7335 DSP for CD and DVD-ROM system SRAM 32 KBYTES DEMODULATOR PLL BIT HF input EFM/EFM DETECTOR DECODER block S-BUS decoder OUTPUT output INTERFACE CLOCK SPINDLE SUB-CPU SAA7335 clock input GENERATOR MOTOR CONTROL INTERFACE motor control V SSA1 RAMAD1...
  • Page 36 DVD-S510/DV-S5350 SAA7335 DSP for CD and DVD-ROM system Pin description SYMBOL TYPE DESCRIPTION VSSA1 supply analog ground 1 Iref analog current reference input for ADC REFLo analog low reference input for ADC REFHi analog high reference input for ADC VREF...
  • Page 37 DVD-S510/DV-S5350 SAA7335 DSP for CD and DVD-ROM system SYMBOL TYPE DESCRIPTION n.c. – not connected, reserved serial subcode output (for CD) EBUOUT digital audio output SYNC S-bus sector sync output FLAG S-bus correction flag output DATA S-bus serial data output...
  • Page 38 DVD-S510/DV-S5350 Am29LV160B 16 MB (2 M x 8-bit / 1 M x 16-bit) CMOS 3.0 Volt-only Sector Erase Flash Memory – DQ15 (A-1) RY/BY# Sector Switches Erase Voltage Input/Output RESET# Generator Buffers State Control BYTE# Command Register PGM Voltage Generator...
  • Page 39 DVD-S510/DV-S5350 MT48LC1M16A1TG S Synchronous DRAM DQ15 DQ14 VssQ VssQ DQ13 DQ12 DQ11 DQ10 VssQ VssQ DQML DQMH CAS# RAS# BANK0 ROW- MEMORY ADDRESS 2,048 ARRAY LATCH (2,048 x 256 x 16) DQML, DQMH 256 (x16) CONTROL LOGIC CAS# SENSE AMPLIFIERS...
  • Page 40 DVD-S510/DV-S5350 STi5505 DVD backend decoder with integrated host processor DATA[13] PI O3[ 7 ] DATA[12] PI O2[ 0 ] DATA[11] DATA[10] PI O2[ 3 ] DATA[9] PI O2[ 4 ] DATA[8] PI O2[ 5 ] PI O2[ 7 ] DMA CHANNELS...

  • Page 41: Wiring Diagram

    DVD-S510/DV-S5350 WIRING DIAGRAM A/V BOARD HP_L ADJA_OUT MIC GND +12VSTBY ADJA_IN H_SYNC +5VD PCM_CLK HP_R +6VSTBY ADJB_OUT +12V +5WD CENTER_ON ADJB_IN MIC_A PCM_OUT2 3V3A KILL STEREO_MUTE MIC GND DIG_OUT PCM_OUT1 CVBS PCM_OUT0 -8VSTBY LRCLK KILL 0|6|12 SCLK 1000 1001 1003 1002 400MM ----->...

  • Page 42: Block Diagram

    DVD-S510/DV-S5350 BLOCK DIAGRAM (U, C, A, R, T) AUDIO/VIDEO BACKEND BOARD MONO BOARD 7020 : 7023 CVBS1 CVBS CVBS2 TDA 4780 +12Vstby (ONLY DVD751) Video IC's and 8Vstab (servo) audio buffers 3V3stab HOST A/V signals -8Vstby Sti5505 -5Vstab Switches OPTICAL...
  • Page 43 DVD-S510/DV-S5350 BLOCK DIAGRAM (B, G) AUDIO/VIDEO BACKEND BOARD MONO BOARD 0/6/12V RGB/CVBS SCART CVBS 7900-7905 7917 AUDIO TEA6420 SCART SWITCHING CVBS(/YC not on SCART) AUDIO SCART RGB/CVBS SWITCHING AUDIO +12Vstby SCART CVBS Video IC's and 8Vstab (servo) audio RGB/CVBS buffers...

  • Page 44: Printed Circuit Board

    DVD-S510/DV-S5350 PRINTED CIRCUIT BOARD MONO (Bottom view)
  • Page 45 DVD-S510/DV-S5350 PRINTED CIRCUIT BOARD MONO (Detailed bottom view 1/2)
  • Page 46 DVD-S510/DV-S5350 PRINTED CIRCUIT BOARD MONO (Detailed bottom view 2/2)
  • Page 47 DVD-S510/DV-S5350 PRINTED CIRCUIT BOARD MONO (Top view)
  • Page 48 DVD-S510/DV-S5350 PRINTED CIRCUIT BOARD MONO (Detailed top view 1/2)
  • Page 49 DVD-S510/DV-S5350 PRINTED CIRCUIT BOARD MONO (Detailed top view 2/2)
  • Page 50 DVD-S510/DV-S5350 PRINTED CIRCUIT BOARD A/V (U, C, A, R, T)
  • Page 51 DVD-S510/DV-S5350 PRINTED CIRCUIT BOARD A/V (B, G)
  • Page 52 DVD-S510/DV-S5350 PRINTED CIRCUIT BOARD DISPLAY...
  • Page 53 DVD-S510/DV-S5350 PRINTED CIRCUIT BOARD POWER (B, G)
  • Page 54 DVD-S510/DV-S5350 PRINTED CIRCUIT BOARD SCHEMATIC DIAGRAM VOLUME VOLUME 1111 D1 1204 A2 1205 D2 3150 C1 C1: Volume Adjust PCB 3237 B1 3238-A A1 3239-A B1 3240 A1 * Only for KOK version only 6204 D1 T121 A2 3240 T122 A2...

  • Page 55: Schematic Diagram

    DVD-S510/DV-S5350 SCHEMATIC DIAGRAM MONO 1/6 (SERVO DALAS) 1100-1 A1 3165 I9 F147 D2 1100-2 A1 3166 G8 F148 D2 1100-3 A1 3167 G3 F149 E2 1100-4 A1 3168 I9 F150 E1 1104 B1 3169 G3 F151 E6 7109 1105 D8...
  • Page 56 DVD-S510/DV-S5350 SCHEMATIC DIAGRAM MONO 2/6 (SERVO MACE) 1201 I13 F226 C1 1205 A4 F227 C2 2203 A10 F228 C11 +3V3S +3V3S 2204 B2 F229 D11 +3V3S 2205 B2 F230 D2 CSTCC +3V3S 3259 3260 2206 C1 F231 D11 2207 D1...
  • Page 57 DVD-S510/DV-S5350 SCHEMATIC DIAGRAM MONO 3/6 (Decoder & Turntable motor control) 1300 A7 F353 G13 1301 G14 F354 H13 2300 A12 F355 H10 2301 A9 F356 H14 3300 2302 A6 F357 H7 F300 2300 2303 A6 F358 H7 CSTCC F301 2304 B6...
  • Page 58 DVD-S510/DV-S5350 SCHEMATIC DIAGRAM MONO 4/6 (Memory) 2400 B3 2401 C9 2402 C10 2403 C12 2404 C13 MONO-BOARD 2405 B6 2406 C9 MEMORY PART 2407 C10 2408 C12 2409 C13 2410 C9 2411 C10 OPTION 2412 C12 +5Vstby 2413 C13 2414 H7...
  • Page 59 DVD-S510/DV-S5350 SCHEMATIC DIAGRAM MONO 5/6 (DVD Decoder STI 5505) 1501-1 A1 3565 C8 1501-2 B1 3566 C7 1501-3 B1 3567 C7 1501-4 B1 3568 C8 OPTION 1501-5 B1 3570 F14 F500 OSD_ACTIVE 1506-1 A14 3571 A2 1506-1 1506-10 B14 3572 B2...
  • Page 60 DVD-S510/DV-S5350 SCHEMATIC DIAGRAM MONO 6/6 (Back-end & Service interface) 1600 B2 3661 G11 F654 H10 1602-1 A14 3662 G11 F655 H10 1602-2 A14 3663 G11 F656 H14 1602-3 A14 3664 G11 F657 H12 5600 1602-4 B14 3665 E11 F658 H14...
  • Page 61 DVD-S510/DV-S5350 SCHEMATIC DIAGRAM A/V (U, C, A, R, T) 1/2 1000 B1 7404 C5 1003 E14 7405 B6 1006-A F14 7406 B6 1006-B G14 7407 D5 1006-C I14 7408 D6 AV_VIDEO +5VVID 1008-A B14 7409 A5 -4V5 4000 2001 A6...
  • Page 62 DVD-S510/DV-S5350 SCHEMATIC DIAGRAM A/V (U, C, A, R, T) 2/2 1001 A1 1008-B E14 1008-C B14 1011 G14 +3V3_D 2200 B2 +5VVID 100n 2201 A10 2202 B7 3200 2208 4200 +3V3_A +3V3_D A2 AV-SOUND 2203 A10 2207 2204 A2 +5VA...
  • Page 63 DVD-S510/DV-S5350 SCHEMATIC DIAGRAM A/V (B, G) 1/4 1300-1 A1 F274 C2 1300-2 A1 F275 E3 1300-3 A1 F276 E4 1300-5 A1 F277 F2 SUPPLY & 1300-6 B1 F278 F2 1300-8 B1 F279 F3 1300-9 B1 F280 F2 VIDEO SWITCHING 1301-10 D1...
  • Page 64 DVD-S510/DV-S5350 SCHEMATIC DIAGRAM A/V (B, G) 2/4 1300-10 G1 7944 G7 1300-11 G1 7948 C4 1300-12 G1 F139 C13 1300-13 G1 F141 C13 1300-14 G1 F176 D12 AUDIO 1300-15 H1 F177 B12 1300-16 H1 F180 A12 TP14 1300-17 H1 F181 D12...
  • Page 65 DVD-S510/DV-S5350 SCHEMATIC DIAGRAM A/V (B, G) 3/4 1304-1 C13 3737 E10 U214 F8 1304-2 C6 3738 H2 U215 D9 1304-3 G13 3739 G3 U216 D8 2353 A10 3744 D8 U217 C8 2355 A10 3747 C9 U218 C8 2357 B10 3748 C8...
  • Page 66 DVD-S510/DV-S5350 SCHEMATIC DIAGRAM A/V (B, G) 4/4 1303 F10 1402-A B9 2032 H8 2377 B9 CVBS & YC 2505 G9 2520 G9 2538 B5 2539 D6 2540 H6 3036 F7 3038 F6 3039 F5 3040 F5 3041 F7 3043 G6...
  • Page 67 DVD-S510/DV-S5350 SCHEMATIC DIAGRAM DISPLAY +5Vstb For models with P50 only FIL2 FIL1 3100 +5Vstb F105 3101 A1 : FRONT DISPLAY PCB F109 F106 F102 3102 F200 F108 IN_P50 1113 3107 2100 3105 14-MT-26GNK 6100 220p BAS216 F103 F201 2101 F104...
  • Page 68 DVD-S510/DV-S5350 SCHEMATIC DIAGRAM POWER (B, G) +12Va 2122 3121 0207 XH-B 2130 2131 470R 2241 5240 +12V +12V 7233 L78M05 1120 6240 3122 +5Vstby +5Vstby HSC0528 5120 -40V 0101-2 BYW29EX VALUE S1NB80 9122 T2.5A H 250V 5131 6241 CT283D3 3132...

  • Page 69: Parts List

    DVD-S510/DV-S5350 WARNING PARTS LIST Components having special characteristics are marked s and must be replaced with parts having specifications equal to those originally in- stalled. ELECTRICAL PARTS For the parts No. of the chip carbon resistors, refer to last page of ELECTRICAL PARTS LIST.
  • Page 70 DVD-S510/DV-S5350 P. C. B. MONO New Parts New Parts...
  • Page 71 DVD-S510/DV-S5350 P. C. B. MONO New Parts New Parts...
  • Page 72 DVD-S510/DV-S5350 P. C. B. MONO & P. C. B. A/V New Parts New Parts...
  • Page 73 DVD-S510/DV-S5350 P. C. B. A/V New Parts New Parts...
  • Page 74 DVD-S510/DV-S5350 P. C. B. A/V & P. C. B. DISPLAY New Parts New Parts...
  • Page 75 DVD-S510/DV-S5350 P. C. B. DISPLAY & P. C. B. POWER CHIP CARBON RESISTORS New Parts New Parts New Parts New Parts...

  • Page 76: Figure

    DVD-S510/DV-S5350 EXPLODED VIEW When disassembling, use the special screw driver with tip shape in figure. 2.7 mm for screws with 33, 35 and 36 1.7 mm for removing MONO board (18-2) from DVD Mechanism (18-1) Note) The screw to fix the MONO board 18-2 to the DVD mechanism 18-1 is not available.

  • Page 77: Mechanical Parts

    DVD-S510/DV-S5350 MECHANICAL PARTS Ref. PART NO. Description Remarks Markets New Parts...
  • Page 78 DVD-S510/DV-S5350 Ref. PART NO. Description Remarks Markets DVD MECHANISM ASS’Y Parts other than the following parts list are not available as spare parts. Ref. PART NO. Description Remarks Markets New Parts...

This manual is also suitable for:

Dv-s5350Dvd-s5350

Table of Contents