Maintenance; Optional Accessories; Operation - Makita FS4000X Instruction Manual

Fig.11
To install the bit, push it firmly into the magnetic bit
holder. Then install the locator by pushing it firmly back
onto the locking sleeve.
Fig.12
Installing removable cord adapter
For Model FS6300R
Fig.13
Insert the removable cord adapter as far as it goes so that
the marking on an end of the removable cord adapter on
the side of connecting to power supply cord is aligned to the
marking on the other end of the removable cord adapter
on the side of connecting to the tool.
Turn the removable cord adapter clockwise until it is
locked with a lock button.
Fig.14
And at this time the marking
cord adapter on the side of power supply cord is aligned to
the marking on the other end of the removable cord
adapter on the side of connecting to the tool.
Fig.15
Removing removable cord adapter
Fig.16
Rotate the removable cord adapter counterclockwise
until it stops while pressing the lower part of the lock
button.
Then pull the removable cord adapter in that position.
Fig.17
Use of locator holder
Fig.18
The locator can be temporarily held on the locator
holder during replacing bit or using without locator. To
hold the locator, position the trapezoidal holes of the
locator on the swells of the locator holder and push it in.

OPERATION

Fig.19
Fit the screw on the point of the bit and place the point
of the screw on the surface of the workpiece to be
fastened. Apply pressure to the tool and start it.
Withdraw the tool as soon as the clutch cuts in. Then
release the switch trigger.
CAUTION:
When fitting the screw onto the point of the bit, be
•
careful not to push in on the screw. If the screw is
pushed in, the clutch will engage and the screw
will rotate suddenly. This could damage a
workpiece or cause an injury.
Make sure that the bit is inserted straight in the screw
•
head, or the screw and/or bit may be damaged.
Hold the tool only by the handle when performing
•
an operation. Do not touch the metal part.
on an end of the removable

MAINTENANCE

CAUTION:
Always be sure that the tool is switched off and
•
unplugged before attempting to perform inspection
or maintenance.
Never use gasoline, benzine, thinner, alcohol or
•
the like. Discoloration, deformation or cracks may
result.
To maintain product SAFETY and RELIABILITY, repairs,
carbon brush inspection and replacement, any other
maintenance or adjustment should be performed by
Makita Authorized Service Centers, always using Makita
replacement parts.

OPTIONAL ACCESSORIES

CAUTION:
These accessories
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Phillips Insert bits
•
Magnetic bit holder
•
Locator
•
Plastic carrying case
•
NOTE:
Some items in the list may be included in the tool
•
package as standard accessories. They may differ
from country to country.
7
or attachments
Only use accessory or
are