After Use; Optional Accessories; Maintenance - Makita XRF03 Instruction Manual

Cordless auto feed screwdriver
Table of Contents

Advertisement

Available languages

Available languages

2.
Press and hold the release buttons on each side
of the casing, and then pull the casing apart.
2
1
Fig.22
► 1. Release buttons 2. Casing
3.
Place the tip of the driver bit into the head of the
screw to be loosened.
4.
Hold the tool firmly against the screw and squeeze
the switch trigger to start.
2
Fig.23
► 1. Driver bit 2. Screw head 3. Switch trigger
5.
Reset the casing back onto the gear housing until
it locks in place after finishing operation.

MAINTENANCE

CAUTION:
Always be sure that the tool is switched
off and the battery cartridge is removed before attempt-
ing to perform inspection or maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
1
3
11 ENGLISH

After use

Wipe off the tool using a dry cloth or cloth slightly moist-
ened with soapy water at regular intervals.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
Drywall screw strip
Phillips bit
Square bit
Pozidriv bit
Feeder box
Casing
Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
MAKITA LIMITED WARRANTY
Please refer to the annexed warranty sheet for the
most current warranty terms applicable to this product.
If annexed warranty sheet is not available, refer to the
warranty details set forth at below website for your
respective country.
United States of America: www.makitatools.com
Canada: www.makita.ca
Other countries: www.makita.com

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xrf03z

Table of Contents