Setting The Date And Time - Sonoro sonoroHIFISO-510 Operating Manual

3. Press to confirm your selection.
ð The display brightness level for well-lit rooms
is now set. The display shows „Display Low" .
4. Adjust the brightness level from 1 – 8 by
pressing and
5. Press to confirm your selection.
ð The display brightness level for low-lit rooms
is now set.
4.9

Setting the date and time

You can make the following adjustments to the date
and time:
n Set the time (manually).
n Set the date (manually).
n Switch the display date on/off.
n Set the time format.
n Set the date format.
n Set the automatic time/date update function.
i
After 10 seconds of inactivity, the device automat‐
ically goes into Standby mode. Any changes to the
settings that have not been completed will not be
saved.
Manual time adjustment
Prerequisite: The device is in standby mode.
1. Press or
ð The display shows the „Set Time" setting.
2. Press .
ð You are now in the „Set Time" setting. The
hour display flashes.
3. Turn until the display shows the correct
hour.
4. Press to confirm the hour.
ð The minute display flashes.
5. Turn until the display shows the correct
minute.
90
.
.
6. Press to confirm the minute.
ð The time is set.
i
Use the
between the hours and minutes displays.
Manual date adjustment
Prerequisite: The device is in standby mode.
1. Press or
ð The display shows the „Set Time" setting.
2. Turn until the display shows the „Set
Date" setting.
3. Press .
ð The day display flashes.
4. Turn until the display shows the correct day.
5. Press to confirm the day.
ð The month display flashes.
6. Turn until the display shows the correct
month.
7. Press to confirm the month.
ð The year display flashes.
8. Turn until the display shows the correct
year.
9. Press to confirm the year.
ð The date is set.
i
Use the
between the day, month and year dis‐
plays.
and buttons to switch
.
and buttons to switch
© sonoro audio GmbH 2016