User Interface Setup - Kenwood DMX7017DABS Instruction Manual

Setting Up

User Interface Setup

You can setup user interface parameters.
1
Press the [MENU] button.
h Popup menu appears. h
2
Touch [SETUP].
h SETUP screen appears. h
3
Touch [User Interface].
h User Interface screen appears.
h
4
Set each item as follows.
Steering Remote Controller
■
Sets the desired function in the steering
remote controller. (Contact your KENWOOD
dealer for details.)
Beep
■
Turns the key touch tone on or off.
Default is "ON".
Vehicle Adaptor Information*
■
Displays the vehicle information.
This function requires a commercial adaptor.
Consult your KENWOOD dealer for details.
Beep for Parking distance control*
■
Sets whether to generate a warning tone
when the onboard proximity sensor detects
a human or object.
Consult your KENWOOD dealer for details.
Parking Distance Display*
■
You can display information about obstacles
around the car.
ON: Always displays information.
Dyn. (Default): Displays information when
the sensor detects obstacles.
OFF: Cancels.
This function requires a commercial adaptor.
Consult your KENWOOD dealer for details.
Parking Distance Position*
■
Select where information about obstacles is
displayed on the screen (left or right).
"Left"/ "Right" (Default)
This function requires a commercial adaptor.
Consult your KENWOOD dealer for details.
58
• *1 This setting is available when a
Ñ
1
2
1
3
4
1
1
5
1
Language Select
■
Selects a language.
Touch Panel Adjust
■
Adjust the sensing position of touch panel.
(P.59)
Clock
■
GPS-SYNC (Default): Synchronizes the clock
time with the GPS.
Manual: Sets the clock manually
Time Zone
■
Select the time zone.
Clock Adjust
■
If you select [Manual] for Clock, adjust the
date and time manually. (P.58)
commercial adaptor is connected.
Adjust the date and time
manually.
Touch [Time Zone] in the User Interface
screen.
Select the time zone.
Touch [Clock Adjust] in the User Interface
screen.
Adjust the date, then adjust the time.
Touch [Set].