External Components - Kenwood DMX7017DABS Instruction Manual

Ñ
Connecting the system and

external components

12 11 10
1
2
3
4
5
HDMI/MHL input
1
(DDX9717BTS only)
MHL maximum power supply current :
5 V = 900 mA
When you connect the cable to HDMI/MHL
terminal, remove the fixture. After connecting
the cable, put the fixture again.
DAB antenna CX-DAB1 (Optional accessory)
2
(DMX7017DABS only)
!
Use of a CX-DAB1(optional accessory) as a DAB
antenna is recommended.
When using a commercially available DAB
antenna, the diameter of the SMB connector
must be Φ6.5 mm or less.
3 AV Audio output (ø3.5 mini jack)
FM/AM antenna input
4
15
14
13
9 8 7
6
Fixture
HDMI/ MHL connector
Φ 6.5 mm (maximum)
Connection/Installation
When connecting to an external amplifier,
5
connect its ground wire to the car's chassis to
avoid damaging the unit.
Rear Audio Preout
(Left; White, Right; Red)
Front Audio Preout
(Left; White, Right; Red)
Subwoofer Preout
(Left; White, Right; Red)
6 External I/F
(DDX9717BTS only)
Maximum power supply current :
12 V = 500 mA
TV tuner remote output
7
(DDX9717BTS only)
DDX9717BTS :
8
AV-IN (CA-C3AV; Optional Accessory) input
DMX7017DABS/ DMX7017BTS :
AV-IN (CA-C3AV; Optional Accessory)/
Dashboard camera input
Dashboard camera interface
9
Connect a Dashboard Camera DRV-N520
(optional accessory). (P.83)
10 Accessory 7: GPS Antenna
11 Accessory 4: Bluetooth Microphone
12 Connect to vehicle's steering remote harness.
Contact your KENWOOD dealer for details.
13 Rear view camera input (Yellow)
14 Front view camera/ Dashboard camera input
(Yellow)
(DDX9717BTS only)
Visual Output (Yellow)
15
81
English