Kenwood DMX7017DABS Instruction Manual page 85

Read Error
The disc is quite dirty.
† Clean the disc. See Precautions on handling discs
(P.4).
Disc is upside down.
† Load the disc with the labeled side up.
Region Code Error
The disc you wanted to play has a region code that
cannot be played with this unit.
† See Region Codes in the World (P.88) or try
another disc.
Error 07–67
The unit is not operating correctly due to some reason
or other.
† Turn the power off and on again. If the "Error 07−67"
message does not disappear, see your nearest
KENWOOD dealer.
No Device (USB device)
The USB device is selected as a source although no USB
device is connected.
† Change the source to any source other than USB/
iPod. Connect a USB device, and change the source
to USB again.
Disconnected (iPod, Bluetooth audio player)
The iPod/Bluetooth audio player is selected as a source
although no iPod/Bluetooth audio player is connected.
† Change the source to any source other than iPod/
Bluetooth. Connect an iPod/Bluetooth audio player,
and change the source to iPod/Bluetooth again.
No Media file
The connected USB device contains no playable audio
file. Media was played that doesn't have data recorded
that the unit can play.
† See Playable Media and Files (P.86) and try
another USB device.
USB device over current status detected.
The connected USB device is rated a current capacity
higher than the allowable limit.
† Check the USB device. Some trouble may have
occurred to the connected USB device.
† Change the source to any source other than USB.
Remove the USB device.
Troubleshooting
85
English