Special Setup - Kenwood DMX7017DABS Instruction Manual

Ñ
Touch panel adjustment
1
Touch [Touch Panel Adjust] on the User
Interface screen.
h Touch Panel Adjust screen appears.
h
2
Follow the instruction on the screen and
long touch the center of each [
1
NOTE
• To cancel the touch panel adjustment, touch
[Cancel].
• To reset to the initial status, touch [Reset].

Special Setup

You can setup Special parameters.
1
Press the [MENU] button.
h Popup menu appears. h
2
Touch [SETUP].
h SETUP screen appears. h
3
Touch [Special].
h Special screen appears. h
4
Set each item as follows.
DEMO
■
Set the demonstration mode. Default is "OFF".
Manual Power OFF
■
Assigns the function of the [HOME] button
when held.
AV OFF: Turns off the screen and audio.
Interrupts from incoming hands-free
calls, rear camera views and so on are
functional, though.
Complete OFF (Default): Switches off the
power. Interrupts are not functional.
■
Locks or unlocks the Audio SETUP Memory/
Recall/Clear.
■
Memorizes the current audio setting.
• Fader/ Balance, Speaker / X'over, Equalizer
(User Preset, SW Level), Position/DTA,
].
Sound Effect (P.63)
2
■
Recalls the memorized audio setting.
■
Clears the AUDIO SETUP Memory and the
currently memorized audio setting.
■
Check the software version of this unit.
(P.59)
■
Displays the open source licenses.
■
Touch [Initialize] and then touch [Yes] to set
all the settings to the initial default settings.
• Audio SETUP Memory is not initialized.
Ñ
Software Information
Check the software version of this unit.
1
Touch [Software Information] in the
Special screen.
2
Confirm the software version.
NOTE
• For how to update the software, see the relevant
update procedure manual which comes with the
software.
SETUP Memory
Audio SETUP Memory
Audio SETUP Recall
Audio SETUP Clear
Software Information
Open Source Licenses
Initialize
Setting Up
59
English