Kenwood DMX7017DABS Instruction Manual page 9

Security Code Setup
You can set up a security code to protect your
receiver system against theft.
When the Security Code function is activated,
the code cannot be changed and the function
cannot be released. Note the Security Code
can be set as the 4 digit number of your
choice.
1
Press the [MENU] button.
h Popup menu appears. h
2
Touch [SETUP].
h SETUP Menu screen appears.
h
3
Touch [Security].
h Security screen appears.
h
4
Touch [Security Code Set] on the Security
screen.
h Security Code Set screen appears. h
5
Enter a security code with four-digit
number and touch [Enter].
6
Enter the same code again and touch
[Enter].
Now, your security code is registered.
NOTE
• Touch [BS] to delete the last entry.
• If you enter a different security code, the screen
returns to step 5 (for the first code entry).
• if you have disconnected the Receiver from
battery, enter the correct security code as that
you have entered in step 5 and touch [Enter]. You
can use your receiver.
To change the security code:
1
Touch [Security Code Change] on the
Security screen, then repeat step 5 and 6.
To clear the security code:
1
Touch [Security Code Cancellation] on
the Security screen.
Calendar/clock settings
1
Press the [MENU] button.
h Popup menu appears. h
2
Touch [SETUP].
h SETUP Menu screen appears. h
3
Touch [User Interface].
h User Interface screen appears.
h
Basic Operations
9
English