Sony HVR-M10C Service Manual page 197

Matching Phase
Coaster (S) block assy
Coaster (S)
shaft
Cam gear
HVR-M10C/M10E/M10J/M10N/M10P/M10U
Coaster (T) block assy
Drum base
groove
GL gear (T) shaft
GL driving arm
Rotary encoder
When re-assembling, adjust the gear phase at the three positions.
GL gear (S)
V groove
The second tooth
from the left
GL gear (S)
• The second tooth from the left of the GL gear (S) and the V-groove
of the GL gear (T) must be in phase.
• The second tooth from the left of the GL drive arm and the v mark
must be in phase.
Rotary encoder
Cam gear
GL gear (T)
GL driving arm
GL gear (T)
mark
The second tooth
from the left
GL driving arm
Cam gear must have raised
higher than the GL driving arm.
GL driving arm
Conversion gear
shaft
HELP