Sony HVR-M10C Service Manual page 173

1-3-19. Brake (T) Block Assy
1. Removal procedure
1) Hold the A portion and remove the brake (T) block assy 1.
BRAKE (T) BLOCK ASSY
Points
to be noted
Hold the A portion
HVR-M10C/M10E/M10J/M10N/M10P/M10U
A
1
Shaft
B
2. Attachment procedure
1) Hold the A portion of the brake (T) block assy 1. While
inserting the slot portion into the notch of the LS chassis block
assy, install it into the shaft B.
2) After completing installation of T reel table assy (refer to 3-9),
rotate the brake (T) block assy in the counter-clockwise
direction by rotating T reel table assy in the clockwise direction.
(Fig. 1)
BRAKE (T) BLOCK ASSY
Brake (T) block assy
Key Points
in Re-assembling
(Fig. 1)
6-30
T reel table assy
Brake (T) block assy