Sony HVR-M10C Service Manual page 166

1-3-13. Cassette Positioning (S)
1. Removal procedure
1) Remove the tention spring (ULE brake) 2 from the hook B
of ULE brake assy.
2) Slide the cassette positioning (S), then remove the cassette
positioning (S) and tension spring (ULE brake) 1 all together
at the same time.
3) Remove the tension spring (ULE brake) 2 from the cassette
positioning (S) 3.
1 Cassette positioning (S),
Extension spring (ULE)
Key Points in Re-assembling
Cassette positioning (S)
HVR-M10C/M10E/M10J/M10N/M10P/M10U
Claw A
B
CASSETTE POSITIONING (S)
A
2. Attachment procedure
1) Hook the tension spring (ULE brake) 2 on the cassette
positioning (S) 3 with tweezers.
2) Hold the cassette positioning (S) 3 with tweezers and insert
the top tip of the claw into the LS chassis block assy A. Lock
it by sliding it in.
3) Install the other end of the tension spring (ULE brake) 2 on
the hook B.
3 Cassette positioning (S)
Confirm the tip of
cassette positioning (S)
being inserted.
6-23
2 Extension spring
(ULE)