Diagnostics And Upkeep; Diagnostics Options - Siemens S7-1200 TELECONTROL Operating Instructions Manual

Diagnostics and upkeep

6.1

Diagnostics options

The following diagnostics options are available:
LEDs of the module
For information on the LED displays, refer to the section LEDs (Page 24).
STEP 7: The "Diagnostics" tab in the Inspector window
Here, you can obtain the following information on the selected module:
● Entries in the diagnostics buffer of the CPU
● Information on the online status of the module
STEP 7: Diagnostics functions via the "Online > Online and diagnostics" menu
With this menu command, you only obtain diagnostics data when the CP or the CPU is
connected to the engineering station via Ethernet.
If the CP can only be reached via mobile wireless, you need to access via TeleService, see
below.
TeleService
From the engineering station you can connect to the remote station via mobile wireless using
TeleService and view the diagnostics data of the CP. For information on establishing a
TeleService connection, refer to the section TeleService (Page 87).
On the diagnostics pages, you can obtain static information on the selected module:
● General information on the module
General information on the module
● Diagnostics status
Information on the diagnostics status
● Ethernet port
Address and statistical information
CP 1242-7 GPRS V2
Operating Instructions, 10/2016, C79000-G8976-C311-02
6
105