Access To The Web Server - Siemens S7-1200 TELECONTROL Operating Instructions Manual

Hide thumbs Also See for S7-1200 TELECONTROL:
Table of Contents

Advertisement

Configuration and operation

4.10 Access to the Web server

Status
8419
8420
8421
8450
84xx
8500
8501
8502
8535
8550
8554
85xx
4.10
Access to the Web server
Access to the Web server of the CPU
The Web server of the S7-1200 station is located in the CPU. Via the CP, you have access
to the Web server of the CPU.
From a PC you can access the Web server of the station via TCSB if the PC is connected to
the telecontrol server via LAN. For details, refer to the manual /4/ (Page 130).
86
Meaning
The channel was interrupted and cannot be used before the connection is terminated.
Certificate chain from the server could not be verified with the root certificate of the CP.
Internal error occurred. Execution was stopped.
Action not executed: Mailbox not available / unreachable. Try again later.
Other error message from the e-mail server
Apart from the leading "8", the status corresponds to the three-digit error number of the
SMTP protocol.
Syntax error: Command unknown.
This also includes the error of having a command chain that is too long. The cause may be
that the e-mail server does not support the LOGIN authentication method.
Try sending e-mails without authentication (no user name).
Syntax error. Check the following configuration data:
Message configuration > Message parameters:
Recipient address ("To" or "Cc").
Syntax error. Check the following configuration data:
Message configuration > Message parameters:
Email address (sender)
SMTP authentication incomplete. Check the "User name" and "Password" parameters in
the CP configuration.
SMTP server cannot be reached. You have no access rights. Check the following configu-
ration data:
CP configuration > E-mail configuration:
User name
Password
Email address (sender)
Message configuration > Message parameters:
Recipient address ("To" or "Cc").
Transfer failed
Other error message from the e-mail server
Apart from the leading "8", the status corresponds to the three-digit error number of the
SMTP protocol.
Operating Instructions, 10/2016, C79000-G8976-C311-02
CP 1242-7 GPRS V2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

S7-1200 - telecontrolCp 1242-7 gprs v2

Table of Contents