Wooden Side Panel; Support Handles / Swivel Handles - Invacare Etude Plus HC User Manual

Bed
Hide thumbs Also See for Etude Plus HC:
Table of Contents

Advertisement

Available languages

Available languages

Invacare® Etude Plus® HC

4.4 Wooden side panel

Press the brackets A down, onto the top frame.

4.5 Support handles / Swivel handles

One or more support handles can be mounted on the top frame to
support the user when getting in or out of bed.
WARNING!
Risk of serious injury
The support handles are not to be used as side rails; to
keep the user from falling out of the bed
– Only use the support handles as a support when
getting in and out of bed.
Mounting the Support handles / Swivel handles
1.
a) Loosen the finger screws A.
b) Rotate the metal plates B out to the side.
2.
10
Press the brackets onto the top frame.
WARNING!
Risk of squeezing, getting trapped or
suffocated
Pay attention to the distance between support/swivel
handle and bed end.
Pay attention to the distance between two support
handles.
– The safety distance A must be bigger than 390
mm.
– The safety distance B must be either 0–60 mm or
318 mm or bigger.
– Never use the support handles in combination
with side rails.
The Swivel handle has to be mounted with the movable
part towards the center of the bed.
3.
a) Rotate the metal plates B back to close the brackets around
the frame.
b) Re-tighten the finger screws A.
Operating the Swivel handles
Open and close the handle
1579562-A

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents