Clock And Alarm - Telstra T-VOICE 503 User Manual

CLOCK AND ALARM

If you have subscribed to your network's Caller ID service, if Clock Master is set
to Base the gateway automatically sets the date and time of the handset when
registered. If the Clock Master is set to handset, you can also manually set the
time on the individual handsets.
Set the date and time
1. Press Menu, scroll u to Clock & Alarm and press Select.
2. Date/Time is highlighted. Press Select.
3. To change the date format, scroll
either DD/MM or MM/DD.
u
to Enter Date, enter the date, e.g. when set to DD/MM, 27/08/17 for 27
4. Scroll
August 2017 and press Ok.
5. Once the date is set, to change the time format, scroll
scroll t or u to select either 12 Hours or 24 Hours.
u
to Enter Time, enter the time, e.g. when set to 24 Hours, 1430 for
6. Scroll
2:30pm and press Save.
If the current time format setting is 12 hour, scroll t or u to select AM or PM.
O
7. Press to return to standby.
Set the alarm
1. Press Menu, scroll u to Clock & Alarm and press Select.
d
2. Scroll to Alarm and press Select.
3. Activation is highlighted, scroll t or u to Off, Once or Daily.
d
to highlight Enter Time.
4. Scroll
5. Enter the time (HH:MM).
If the current time format setting is 12 hour, scroll t or u to select AM or PM.
d
to highlight Ringtone t or u to select the desired ringtone and press
6. Scroll
Save.
O
7. Press to return to standby.
Notes
If the alarm is set to Once,
sounded once.
If the alarm is set to Daily,
sounded.
When the alarm rings, press Off or
d
to Date Format and scroll t or u to select
will disappear from the screen after the alarm has
will remain on the screen after the alarm has
O
to stop the ring.
26
d
to Time Format and