Page 1
SKF Shaft Alignment Tool TKSA 11 Quick Start Guide A. Measuring unit E. Two inductive proximity sensors B. Power button F. V-bracket with locking chain C. Connection blue LED G. Magnetic bar holder D. Status red/green LED H. Reference bar...
Page 2
Install the SKF TKSA 11 App using the QR code at right If you do not have a QR code reader, follow these steps to install the App: 1. M ake sure you are connected to a network. Tap the App Store icon* 3. Tap the Search area 4. Enter “SKF TKSA 11” 5. Tap FREE 6. Tap INSTALL...
Page 3
2. O n the magnetic bar holder, place the shortest bar that still spans between the shaft brackets. 3. M ount the measuring unit on the rods at the movable side. Adjust the gap between the inductive proximity sensors and the reference bar to approx. 3 mm (1/8 inch). 3. T he SKF TKSA 11 can be mounted directly on couplings when needed. 4. S witch on the unit by pushing the Power button at the top of the unit. The status LED will turn green when on. Connect the App to the measuring unit 1. M ake sure both the SKF TKSA 11 unit and your Apple mobile device’s Bluetooth are on. The first screen...
Page 4
SKF TKSA 11 App help files The SKF TKSA 11 App includes many extras including built-in Instructions for Use, helpful videos, and web links. Tap on the information icon for access. The help welcome screen is shown at right, with the Instructions for Use at the top, followed by instructional videos. Instructions for Use Instructions for Use Sample video main screen detail D etailed mounting and operating instructions, including helpful videos, can be found in the SKF TKSA 11 App under the information icon . Select the Help option in the menu. A printed version of the SKF TKSA 11 instructions is available online: skfprograms.com/TKSA_11_Instructions_MP5433.pdf SKF TKSA 11...
Page 5
• Read and follow all warnings in this document before handling and operating the equipment. You can be seriously injured, equipment and data can be damaged if you do not follow the safety warnings. • Always read and follow the operating instructions. • Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts. • Do not overreach. Keep proper footing and balance at all times to enable better control of the device during unexpected situations. • Use safety equipment. Non-skid safety shoes, hard hat or hearing protection must be used for appropriate conditions. • Never work on energized equipment unless authorized by a responsible authority. Always turn off the power of the machine before you start. • Do not expose the equipment to rough handling or impacts this will void the warranty. • Avoid direct contact with water, wet surfaces, or condensing humidity. • Do not attempt to open the device. • Use only accessories that are recommended by SKF. • Device service must be performed only by qualified SKF repair personnel. • We recommend calibrating the tool every 2 years. SKF TKSA 11...
Need help?
Do you have a question about the TKSA 11 and is the answer not in the manual?
Questions and answers