Changing The Tool - Fein ASCD18W2 Instruction Manual

OBJ_BUCH-0000000122-001.book Page 13 Friday, April 19, 2013 10:39 AM

Changing the tool.

Before mounting or replacing application tools or accessories, remove the bat-
WARNING
tery. This preventive safety measure rules out the danger of injuries through
accidental starting of the power tool.
Mounting application tools
ASCD 18 W4 (figure 3).
Push the sleeve of the tool holder toward the
front.
Insert the application tool and release the
sleeve.
Mounting application tools
ASCD 18 W2 (figure 4).
Mount the socket to the square drive.
To remove the socket, press down the lock
on the square drive using a small pin.
Fig. 3
Bitholder
Bit
Fig. 4
Pin
Socket
en
13