Configuring the device
4.1
Overview
The specifications in the "Comfort Panel" operating instructions apply for commissioning and
parameter assignments.
The enhanced brightness control of the Comfort Panels Outdoor differs from the other
Comfort HMI devices and is described in the following section.
4.2
Changing the brightness settings
The Comfort Outdoor Panels feature a manual or automatic brightness control with a
brightness sensor. Make the appropriate settings in the Control Panel.
Requirement
The Control Panel is open.
Set brightness
Proceed as follows:
1. Open the "Display Properties" dialog with the Display icon.
2. Switch to the "Brightness" tab. The figure below shows the factory settings.
TP700 Comfort Outdoor, TP1500 Comfort Outdoor
Compact Operating Instructions, 05/2016, A5E35956909-AC
4
21