Siemens SIMATIC TP700 Comfort Outdoor Compact Operating Instructions page 22

Configuring the device
4.2 Changing the brightness settings
Select the "Manual" or "Auto" option.
– In the "Manual" mode, you can adjust the brightness to the desired value using the
– in the "Auto" mode, you can set the minimum and maximum brightness for the
3. If you want to check the settings without closing the dialog, press the "Apply" button.
4. To discard the settings and close the dialog, press the "Cancel".
button. To save the settings and close the dialog, press the "OK" button.
22
slider.
Note
"Manual" mode
A change in the brightness value through the configuration takes precedence over the
manual setting.
automatic brightness control of the HMI device under "Brightness Range".
NOTICE
"Auto" mode (factory state)
The brightness parameters are controlled by the light sensor in "Auto" mode. The
brightness can no longer be changed manually or through the configuration.
The "Screen saver" function is available as usual.
TP700 Comfort Outdoor, TP1500 Comfort Outdoor
Compact Operating Instructions, 05/2016, A5E35956909-AC