What You Need; Controller Hardware What You Need - Allen-Bradley 1769-L30ERM Quick Start Manual

Chapter 1 Prepare the CompactLogix 5370 L3 Controller Hardware

What You Need

Table 4 lists the hardware components used in this chapter. The parts listed in this table are done
so with the assumption that you will install an EtherNet/IP and DeviceNet network.
Table 4 - Parts Used with This Quick Start
Quantity Cat. No.
1 or more N/A
1 One of the following:
• 1769-L30ER
• 1769-L30ERM
• 1769-L30ER-NSE
• 1769-L33ER
• 1769-L33ERM
• 1769-L36ERM
1 1769-PA4
1 1606-XLDNET8
1 1769-ECR
1 or more 1585J-M4TBJM-2
1 1783-EMS08T
1
1 1769-SDN
1 1769-OB16
1 1485C-P1E75
2 1485A-T1E4
2 or more 1485P-P1E4-R5
1 or more 1485K-P1F5-C
1 1485T-P1E4-B1
18 Rockwell Automation Publication IASIMP-QS023B-EN-P - December 2012
Description
DIN rail (steel, not aluminum)
CompactLogix 5370 L3 controller
The tasks described in this publication use a
1769-L36ERM controller.
Bus power supply
DeviceNet network power supply
Compact I/O end cap/terminator
Ethernet cable (straight-through)
Stratix 6000 Ethernet managed switch
External power supply for Stratix 6000 Ethernet
managed switch
DeviceNet communication module
Compact I/O output module
KwikLink flat cable, 75 m (246 ft)
KwikLink terminator/resistor
KwikLink sealed micro connector
KwikLink QD Cordset Micro right-angle male
KwikLink power tap module