Christie LW502 User Manual page 42

Commands Control Description
ERST ? Error Status inquiry
LAMP ? Lamp Status inquiry
INST ? Input Source List inquiry
NAME ? Projector Name inquiry
Manufacturer's Name
INF1 ?
INF2 ? Model Name inquiry
INFO ? Other Information inquiry Responds with the factory information and so on
CLSS ? Class Information inquiry 1
NOTE • The password used in PJLink
in the Web Control. To use PJLink
password in Web Browser Control.
• For specifications of PJLink
Machine and Information System Industries Association.
URL: http://pjlink.jbmia.or.jp/
• Trademark PJLink is a trademark applied for trademark rights in
Japan, the United States of America and other countries and areas.
LW502/LWU502 User's Manual - Technical
020-001099-01 Rev. 1 (06-2016)
1st byte: Refers to Fan error; one of 0 to 2
2nd byte: Refers to Lamp error; one of 0 to 2
3rd byte: Refers to Temperature error; one of 0 to 2
4th byte: Refers to Cover error; one of 0 to 2
5th byte: Refers to Filter error; one of 0 to 2
6th byte: Refers to Other error; one of 0 to 2
The meaning of 0 to 2 is as given below
0 = Error is not detected
1 = Warning
1st number (digits 1 to 5): Lamp Time
2nd number : 0 = Lamp off, 1 = Lamp on
11 23 31 33 36 51
Responds with the name set in the item
PROJECTOR NAME of the NETWORK -
NETWORK SETUP menu
CHRISTIE
inquiry
LWU502
LW502
without authentication, do not set any
TM
, see the web site of the Japan Business
TM
PJLink command (continued)
Parameter or Response
2 = Error
is the same as the password set
TM
40