Christie LW502 User Manual page 17

Hide thumbs Also See for LW502:

Network Bridge Communication

This projector is equipped with NETWORK BRIDGE function.

When the projector connects to the computer by wired or wireless LAN

communication, an external device connected with this projector by RS-232C

communication can be controlled from the computer as a network terminal.

For details, see the 7. Network Bridge function in the Network Guide.

NOTE • If data is transferred using wireless and wired LAN at the same time,

the projector may not be able to process the data correctly.

Connection

If you use wired LAN, connect the computer's LAN port and the projector's

LAN port with a LAN cable. Use the cable that fulfi lls the specifi cation shown

in fi gure. If you use wireless LAN, insert the USB wireless adapter into the

projector's LAN port.

Connect the projector's CONTROL port and the RS-232C port of the devices

that you want to control with a RS-232C cable.

Turn the computer on, and after the computer has started up turn the

projector on.

Set the COMMUNICATION TYPE to NETWORK BRIDGE in the

COMMUNICATION menu of the OPTION - SERVICE menu.

LW502/LWU502 User's Manual - Technical

020-001099-01 Rev. 1 (06-2016)

WIRELESS port

LAN

LAN or

HDBaseT port

• LAN cable (CAT-5e or greater)

Network Bridge Communication

USB wireless adapter

CONTROL

RS-232C

Lwu502