Installation; Technical Data - AEG A72710GNW0 User Manual

22 www.aeg.com

7. INSTALLATION

WARNING!
Refer to Safety chapters.
7.1 Positioning
This appliance can be installed in a dry,
well ventilated indoor where the ambient
temperature corresponds to the climate
class indicated on the rating plate of the
appliance:
Climate
class
SN
N
ST
T
7.2 Electrical connection
• Before plugging in, ensure that the
voltage and frequency shown on the

8. TECHNICAL DATA

Height
Width
Depth
Rising time
9. ENVIRONMENT CONCERNS
Please recycle all materials marked with
the symbol
materials appropriately and help to
protect the environment, and future
generations. Do not dispose of electrical
equipment marked with the
Ambient temperature
+10°C to + 32°C
+16°C to + 32°C
+16°C to + 38°C
+16°C to + 43°C
1850 mm
595 mm
668 mm
28 h
. Dispose of all packaging
symbol
rating plate correspond to your
domestic power supply.
• The appliance must be earthed. The
power supply cable plug is provided
with a contact for this purpose. If the
domestic power supply socket is not
earthed, connect the appliance to a
separate earth in compliance with
current regulations, consulting a
qualified electrician.
• The manufacturer declines all
responsibility if the above safety
precautions are not observed.
• This appliance complies with the
E.E.C. Directives.
7.3 Installation of the
appliance and door reversal
Please refer to separate
instructions on installation
(ventilation requirements,
levelling) and door reversal.
Voltage
Frequency
The technical information is situated in
the rating plate, on the external or
internal side of the appliance and in the
energy label.
along with the general house hold waste.
Dispose all electrical goods via
applicable local authority collections, or
at local authority or, commercial
recycling centres.
230 - 240 V
50 Hz