Start Using The Controller; Make Connections; 1756-L7X Connection Options - Allen-Bradley 1756-L61 User Manual

Make Connections

Start Using the Controller

Topic
Make Connections
Connect to the 1756-L7x Controller
Connect to the 1756-L6x Controller
Upgrade Controller Firmware
Set the Communication Path
Go Online with the Controller
Download to the Controller
Upload from the Controller
Choose the Controller Operation Mode
Use the Mode Switch to Change the Operation Mode
Use RSLogix 5000 Software to Change the Operation Mode
Load or Store to the Memory Card
Use ControlLogix Energy Storage Modules (ESMs)
Estimate the ESM Support of the WallClockTime
Maintain the Battery (1756-L6x controllers only)
Additional Resources
Before you can begin using your controller, you must make a connection to the
controller.

1756-L7x Connection Options

Connection options with the 1756-L7x include the following:
• Connecting using a USB cable, see
on page 45
• Installing and configuring a communication module in the chassis with
the controller, refer to the installation instructions of the communication
module
For information on Double Data Rate (DDR) backplane communication usage,
see Double Data Rate (DDR) Backplane Communication
Rockwell Automation Publication 1756-UM001M-EN-P - February 2012
Chapter
Page
43
45
48
51
58
59
60
61
63
63
65
66
72
74
75
81
Connect to the 1756-L7x Controller
on page 95.
3
43