Automatic Timer; Kitchen Timer; Stopwatch Function; Automatic Safety Cut-Out - Siemens ET6**LNB1 SERIES Instruction Manual

Touch the desired presetting in the settings range.
2.
The possible presetting from left to right is 1, 2, 3,
etc. to 9 minutes. Within 10 seconds, slide your
finger along the settings range repeatedly until the
desired cooking time is reached.
The cooking time counts down. If you have set a
cooking time for more than one hotplate, the shortest
cooking time is always displayed.
Automatic setting
If you touch settings range presets 1 to 5 for a longer
time, the cooking time automatically counts back down
to one minute.
If you touch settings range presets 6 to 9 for a longer
time, the cooking time automatically counts up to 99
minutes.
When the time has elapsed,
When the cooking time has elapsed, the hotplate
switches off. You will hear an audible signal and
lights up in the display for 10 seconds. The indicator
‹‹
flashes. Touch any symbol. The displays go out and
x
the audible signal ceases.
Changing or cancelling the cooking time
Touch the symbol 0 2 and then select the hotplate.
Change the cooking time or set to
range.
Notes
You can set a cooking time of up to 99 minutes.
■
If the cooking time has counted down to the last
■
minute, the timer display changes from minutes to
seconds.

Automatic timer

You can use this function to preselect a cooking time
for all hotplates. Each time a hotplate is switched on,
the pre-selected cooking time then counts down. When
the cooking time has elapsed, the hotplate switches off
automatically.
You can find out how to switch on the automatic timer in
the Basic settings section.~ Page 10
You can change the cooking time for a hotplate
Note:
or switch off the automatic timer for the hotplates:
Touch the symbol 2 and then select the hotplate.
0
Change the cooking time or set to
range.
in the settings
‹‹
in the settings
‹‹

Kitchen timer

You can use the kitchen timer to set a time of up to 99
minutes. It runs independently of all the other settings.
To activate it the hob must be on.
Setting the kitchen timer
Touch the symbol, the
0
1.
min lights up in the timer display.
Set the desired time in the settings range.
2.
The timer starts counting down after a few seconds.
When the time has elapsed,
When the time has elapsed, you will hear an audible
signal and lights up in the display for 10 seconds.
‹‹
The indicator flashes. Touch any symbol. The
V
displays go out and the audible signal ceases.
Setting the correct time
Use the 0 symbol to select the kitchen timer and reset
the time.

Stopwatch function

The stopwatch function displays the time that has
passed since activating the function.
The stopwatch function only works when the hob is
switched on. When the hob is switched off, the
stopwatch function is switched off as well.
The stopwatch function is switched on by touching the
symbol. appears in the timer display and timing
þ ‹‹
starts. Seconds are displayed during the first minute,
and then minutes.
The stopwatch function is switched off by touching the
symbol again. The timer display goes out.
þ
If another time-setting option is selected in
Note:
addition to the stopwatch function, the setting appears
in the timer display for 10 seconds. The stopwatch
function is then displayed again.
bAutomatic safety cut-out
If a hotplate has been switched on for a long time
c u t - o u t A u t o m a t i c s a f e t y
without the setting being changed, the automatic time
limit is activated.
The hotplate stops heating.
heat indicator flash alternately on the hotplate display.
The display goes out when you touch any control. You
can make new settings.
When the time limit is activated depends on the heat
setting selected (1 to 10 hours).

Automatic safety cut-out

display lights up.
V
and the / residual
"‰ • œ
en
‹‹
9