Related Manuals for Siemens ET6 LNV1 Series
Summary of Contents for Siemens ET6 LNV1 Series
- Page 1 ET6..LNV1. EN User manual and installation instructions Register your appliance on My Siemens and discover exclusive services and offers. Siemens Home Appliances...
- Page 2 ET6..LNV1. Ø = cm...
-
Page 3: Table Of Contents
Safety en Further information and explanations are available online: Table of contents ¡ Do not connect the appliance if it has been damaged in transit. INFORMATION FOR USE 1.2 Intended use Safety .............. 3 Only a licensed professional may connect ap- pliances without plugs. Damage caused by in- Preventing material damage ...... 5 correct connection is not covered under the Environmental protection and saving en-... -
Page 4: Safety
en Safety 1.4 Safe use WARNING ‒ Risk of electric shock! Improper repairs are dangerous. WARNING ‒ Risk of fire! ▶ Repairs to the appliance should only be Leaving fat or oil cooking on an unattended carried out by trained specialist staff. hob can be dangerous and may lead to fires. ▶... -
Page 5: Preventing Material Damage
Preventing material damage en 2 Preventing material damage 2.1 Overview of the most common damage ATTENTION! Rough pot and pan bases will scratch the ceramic. Here you can find the most common types of damage Check your cookware. ▶ and tips on how to avoid them. Boiling pans dry may damage cookware or the appli- ance. -
Page 6: Familiarising Yourself With Your Appliance
en Familiarising yourself with your appliance 4 Familiarising yourself with your appliance The instruction manual is the same for various different hobs. You can find the hob dimensions in the overview of models. → Page 2 4.1 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operat- ing status. - Page 7 Basic operation en 4.5 Residual heat indicator Hotplate Activating and deactivating Extended Touch . The hob has a two-stage residual heat indicator for cooking zone each hotplate. Do not touch the hotplate while the re- sidual heat indicator is lit up. Notes ¡...
- Page 8 en Basic operation 5.8 Recommended cooking settings Vegetables, fresh 2.5-3.5 10-20 Vegetables, frozen 3.5-4.5 10-20 You can find an overview of different foods with appro- priate power levels here. Food in a pressure cooker The cooking time varies depending on the type, weight, Bring the water to the boil with the lid on.
- Page 9 PowerBoost function en 6 PowerBoost function PowerBoost lets you heat up large volumes of water Select the hotplate. even faster than on heat setting 9. Touch . The PowerBoost function is only available on hotplates a The indicator lights up. marked ...
- Page 10 en Sensor frying system Touch . Meat Food Frying Total frying setting time in minutes after the signal Escalope, plain or breaded 6–10 Fillet 6–10 Chop 10–17 Cordon bleu 15–20 Steaks rare, 3 cm thick 6–8 Steaks medium or well-done, 8–12 lights up in the hotplate indicator and 3 cm thick also displayed.
- Page 11 Childproof lock en Sauces Peppers, green asparagus 4–15 Sweating vegetables with fat 10–20 Tomato sauce 25–35 but no water, e.g. courgettes, Béchamel sauce 10–20 green peppers Cheese sauce, e.g. Gorgonzola 10–20 Mushrooms 10–15 sauce Glazed vegetables 6–10 Reducing sauces, e.g. Bo- 25–35 lognese/tomato sauce Frozen products...
- Page 12 en Automatic switch-off Within 10 seconds slide your finger along the con- Tip: The automatic timer is valid for all hotplates. You trol panel until the required cooking time is reached. can reduce or delete the cooking time for individual hotplates. → Page 11 9.2 Kitchen timer You can set a time of up to 99 minutes after which a signal will then sound.
-
Page 13: Energy Consumption Display
Keep-warm function en 11 Keep-warm function The keep-warm function allows you to melt chocolate 11.2 Switching off the keep-warm function or butter and to keep food or cookware warm. Touch . Select the hotplate. 11.1 Switching on the keep-warm function lights up on the heat setting display. Touch ... -
Page 14: Home Connect
en Home Connect Touch again. Dis- Selection play Activation of the heating elements – Switched off – Switched on – The last setting before switching off the hotplate. Resetting to the factory settings – Switched off. – Switched on. Factory setting → "Overview of the hood control settings", Page 16 appears. -
Page 15: Hob-Based Hood Control
Hob-based hood control en 16 Hob-based hood control If both appliances are Home Connect-compatible, con- Requirements nect the appliances in the Home Connect app. To do ¡ Your router has a WPS button. You can find informa- this, connect the two appliances to Home Connect and tion about this in the manual for your router. -
Page 16: Cleaning And Servicing
en Cleaning and servicing Switching off the fan Automatic mode will also end if you select a differ- ent fan setting. Select the fan setting 0 on the control panel. ▶ Setting the hood lighting Switching on automatic mode You can switch the hood lighting on and off using the Press and hold until the display shows ... -
Page 17: Troubleshooting
Troubleshooting en Tip: You can achieve good cleaning results using a 17.2 Cleaning the glass ceramic special sponge for glass ceramic. Clean the hob after every use to stop cooking residues from getting burnt on. 17.3 Cleaning the hob surround Note: Note the information on unsuitable cleaning products. - Page 18 en Disposal Fault Cause and troubleshooting and the heat set- Hot pot near the control panel. There is a risk that the electronics will overheat. ting flash alternately. Remove the pan. ▶ A signal sounds. a The display goes out shortly afterwards. and audible signal Hot pot near the control panel.
-
Page 19: Installation Instructions
Installation instructions en The product number (E no.) can also be found on the 20.1 Product number (E-Nr.) and production glass ceramic. You can also display the customer ser- number (FD) vice index (KI) and the production number (FD) in the You can find the product number (E-Nr.) and the pro- Basic settings → Page 13. - Page 20 en Installation instructions 21.8 Removing the hob Disconnect the appliance from the power supply. Push out the hob from below. 21.6 Electrical connection To protect the appliance, do not remove it from the polystyrene trays until you press the appliance into the cut-out. Never lay the appliance down flat on its side. ¡...
- Page 24 EN Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom BSH Hausgeräte GmbH Carl-Wery-Straße 34...