Table of Contents
Advertisement
Changing the basic settings
The hob must be switched off.
Switch on the hob.
1.
Within the next 10 seconds, touch the
2.
4 seconds.
appears and
lights up in the hotplate display.
™‚
‹
Touch the
0
symbol repeatedly until the desired
3.
display appears.
Set the desired value on the control panel.
4.
Touch the
symbol for 4 seconds.
0
5.
The setting is activated.
Switching off
To exit the basic setting, switch off the hob with the
main switch and make new settings.
DCleaning
Suitable maintenance and cleaning products can be
C l e a n i n g
purchased from the after-sales service or in our e-Shop.
symbol for
0
Ceramic
Clean the hob after each use. This will prevent spills
from burning onto the ceramic.
Only clean the hob when it has cooled down sufficiently.
Use only cleaning agents which are suitable for glass
ceramic. Follow the cleaning instructions on the
packaging.
Never use:
■
■
■
■
■
■
Ground-in dirt can be best removed with a glass
scraper, available from retailers. Please note the
manufacturer's instructions.
You can also obtain a suitable glass scraper from our
after-sales service or from the e-Shop.
Using special sponges to clean glass ceramic achieves
great cleaning results.
Hob surround
To prevent damage to the hob surround, observe the
following instructions:
■
■
■
■
Undiluted washing-up liquid
Detergent intended for dishwashers
Scouring agents
Harsh cleaning agents such as oven spray or stain
remover
Abrasive sponges
High-pressure cleaners or steam jet cleaners
Use only hot soapy water.
Wash new sponge cloths thoroughly before use.
Do not use any sharp or abrasive agents.
Do not use the glass scraper.
Cleaning
en
11
Advertisement
Table of Contents
