Table of Contents
Advertisement
Keep warm function
en
zKeep warm function
The Keep warm function is suitable for melting
K e e p w a r m f u n c t i o
n
chocolate or butter and for warming food and cookware
Switching on the Keep warm function
Touch the
symbol
è
1.
Select the hotplate.
–
2.
display.
The Keep warm function is switched on.
Switching off the Keep warm function
Touch the
symbol.
è
1.
Select the hotplate.
‹
2.
display.
The Keep warm function is switched off.
kWipe protection
If you wipe over the control panel while the hob is
W i p e p r o t e c t i o n
switched on, settings may be altered.
To prevent this from happening, your hob has a wipe
protection function. Touch the
signal sounds. The
#
panel is locked for 30 seconds. You can now wipe over
the control panel without altering any settings.
The main switch is excluded from the wipe
Note:
protection function. You can switch off the hob at any
time.
[Energy consumption
indicator
You can use this function to have the total energy
n i n d i c a t o r
E n e r g y c o n s u m p t i o
consumption between switching the hob on and off
displayed.
Once switched off, the consumption in kilowatt hours
(e.g. 1.87 kWh) is displayed for 10 seconds
The accuracy of the display depends, amongst other
things, on the voltage quality of the power supply.
10
lights up on the heat setting
lights up on the heat setting
symbol. An audible
#
symbol lights up. The control
The display has not been activated. You can find out
how to activate the display in the Basic settings
section.~ Page 10
QBasic settings
Your appliance has various basic settings. You can
B a s i c s e t t i n g s
adapt these settings to suit your own needs.
Display
Function
screen
Automatic childproof lock
™‚
Switched off.*
‹
Switched on.
‚
Manual and automatic childproof lock switched off.
ƒ
Audible signal
™ƒ
Confirmation signal and operation error signal are
‹
switched off (main switch signal always remains).
Only the operation error signal is switched on.
‚
Only the confirmation signal is switched on.
ƒ
Confirmation signal and operation error signal switched
„
on.*
Energy consumption display (Ask your electricity
™„
supply company what the mains voltage is)
Consumption display switched off.*
‹
Consumption display with mains voltage at 230 V.
‚
Consumption display with mains voltage at 400 V.
ƒ
Consumption display with mains voltage at 220 V.
„
Consumption display with mains voltage at 240 V.
...
Automatic timer
™†
Switched off.*
‹‹
Cooking time, after which the hotplates switch off.
‹‚
-
ŠŠ
Duration of the timer end signal
™‡
10 seconds.*
‚
30 seconds
ƒ
1 minute.
„
Activation of the heating elements
™ˆ
Switched off.
‹
Switched on.
‚
Last setting before the hotplate was switched off.*
ƒ
Reset the basic settings
™‹
Switched off.*
‹
Switched on.
‚
*Basic setting
Advertisement
Table of Contents
