Digital Outputs; 1) Standard Digital Outputs - ABB ANR96 User Manual

ANR96 - USER MANUAL
8.2)

DIGITAL OUTPUTS

The ANR96 has 2 digital outputs. At the standard configuration it's possible to add 2 others Photomos
or relay digital outputs.
Each outputs can be programmed as min/max threshold, external band, always ON, pulse emission,
remote control and load control.
8.2.1) STANDARD DIGITAL OUTPUTS
The signs + and - on outputs in the picture have electric meaningless.
If long distances must be covered, the wires connected to the ANR96 needs to be wired in a separate
channel from the power supply cables, if an intersection occurs between the power supply cable and
the analog wires, please remember to cross the intersection at 90 degrees, in order to cut the
generated magnetic fields.
Do2-
L1V
Do2+
L2V
L3V
N
L N
S1 S2 S1 S2 S1 S2
Vaux
L1 L2 L3
-22-
Do2-
Do2+