Energy - ABB ANR96 User Manual

ANR96 - USER MANUAL
11.6)

ENERGY

In the ENERGY menu it's possible to modify the unit of measurement of
energies, to set at the initial value the generic and energy counters, to
manage on the time-bands.
• Type, allows to choose the unit of measurement for the energy counter
kWh (Normal) or MWh (Heavy).
• PRESET, allows to set at initial value the energy counters and generic
counters.
- ENERGIES, it's possible to set energy total counters at initial value.
These values are expressed in kWh and kVArh; the visualization on
total energies page will be congruent with the type of energy (Normal or
Heavy). The time bands counters don't consider the preset values. Only
total energy counters consider these values.
This function is useful for example to compare the consumption with an
energy counter already in use.
- COUNTERS, it's possible to set the 8 generic counters at initial value.
• TIMEBANDS (OPTION), it' possible subdivide the energy consumption in
12 time bands. In this way it's possible to value the energy costs where
the energy suppliers apply the time band tariff or it's necessary to divide
the consumption in different period. To program the time bands function
to accede at the TIMEBANDS menu with the following sub menu:
- Update day, sets the day in which change the month in the time bands
(range 0÷31). If the value is 0, from the last day of each month the
energy is increased in the counter of the next month. If the value is
between 1 and 15, from the day fixed the energy is increased in the
counter of the actual month, before of this value the energy is increased
in the previous month. If the value is between 16 and 31, from the day
fixed the energy is increased in the counter of the next month, before of this value the energy is
increased in the actual month. If the actual month has fewer days than the value fixed, the energy
will be increased into the next month counter from the last day of the month.
- Period Id, period number. 15 periods to set different time bands. For each period it's possible to
program:
- BAND, to program the selected period.
- Start / Stop, to program the start and the stop of the selected period.
Month, is a number from 1 to 12 that defines the months (1 January,
2 February, ecc.) of the year corresponding at the start (or the end) of
the selected period.
Day, is a number from 1 to 31 that defines the day of the month
corresponding at the start (or the end) of the selected period.
The programming is the same of the month programming.
-49-