Reset; Exit Setup; List Of Measures - ABB ANR96 User Manual

ANR96 - USER MANUAL
11.12)

RESET

The Reset page allows to cancel some operation or the complete operation
of the setup system, reset modes are classified in four groups.
RESET MEASURES, reset all values or selected group of measure. In
particular:
• All, reset all of measures (minimum and maximum, energy counter, time
bands).
• Energies, reset total energy counters.
• TimeBands, reset time bands.
• Min/Max, reset minimums and maximums.
Reset Setup, delete all definition in the setup and the instrument come
back to default setup.
Reset Storage, delete all data stored in the memory.
Reset Counter, delete all counters joined at digital inputs.
Reset Max.Demand, delete max demand values.
Reset Hour-Cnt., to delete all hour counters.
Reset Global, reset complete of the instrument (Setup, measures stored,
RAM).
11.13)

EXIT SETUP

The last voice of the setup menu is "EXIT SETUP", which allows the operator to leave the instrument
setup and go back to the "REAL TIME VISUALIZATION PAGES".
Operator may also exit the setup by pressing simultaneously the "RIGHT & LEFT" button one or more
time depending of the branch in which you are.
12)

LIST OF MEASURES

To program the variables in setup for:
- digital outputs (alarm and pulse)
- analog outputs
it's necessary to use these codes:
3Ph.V Three-phase voltage
L1N V L1 phase voltage
L2N V L2 phase voltage
L3N V L3 phase voltage
L12 V Voltage between L1 and L2 phases
L23 V Voltage between L2 and L3 phases
L31 V Voltage between L3 and L1 phases
3Ph.I Three-phase current
L1 I L1 phase current
L2 I L2 phase current
L3 I L3 phase current
THDI L1 THD current L1 phase
THDI L2 THD current L2 phase
THDI L3 THD current L3 phase
-59-