Installation; Safety; Operator Safety - ABB ANR96 User Manual

ANR96 - USER MANUAL
4)

INSTALLATION

4.1)

SAFETY

On receipt of the instrument and prior to installation, make sure it is intact and has not been damaged during
shipment.
Before installing, make sure the operating voltage and mains voltage are compatible.
The instrument power supply must not be earthed.
The instrument is equipped with a fuse on the power supply type: 5x20mm 315mA 250V Fast (es. Schurter FSF).
• Always disconnect the instrument from all power sources before opening it for maintenance and/or repairs.
• The instrument's capacitor may still be charged even after it has been disconnected from all power sources.
• Maintenance and/or repairs must only be carried out by qualified and authorized personnel.
• If in any doubt about the instrument's safety take it out of service and implement the necessary procedures to
prevent its inadvertent use.
• Instrument operation is no longer safe:
A) when the instrument shows clear signs of damage.
B) when the instrument does not work.
C) after long storage in extreme conditions.
D) after serious damage during shipment.
4.2)

OPERATOR SAFETY

Carefully read the following pages before installing and using the purchased instrument.
Maintenance and/or repairs must only be carried out by qualified and authorized personnel.
To ensure proper and safe use of the instrument and its correct maintenance and/or repairs, authorized personnel
must follow normal safety procedures at all times.
SYMBOLS
!
READ CAREFULLY THE CONTAINED INSTRUCTIONS
-13-