Table of Contents
Advertisement
2.4 Logging on Encoder Configuration Interface
The encoder has built-in WEB server. All the encoder configurations can be
performed through the web browser (e.g., Internet Explorer). Enter 192.168.1.100 to
the browser address field, and then the following log-on page will appear.
Enter user name: admin (default administrator user)
Enter password: admin (default administrator password)
administrator account name of the system cannot be changed, but you can change
the password according to the actual needs.)
Click "log on" button to enter the encoder management configuration page, as shown
in the following figure:
Copyright© Shenzhen Reach IT Co., Ltd.
REACH ENC110 SD Encoder
User Manual
(Note: The default
8 / 12
Advertisement
Table of Contents
