Connect To Encoder - Reach ENC1200 User Manual

REACH ENC1200
User Manual
click Setup program, and operate according to the prompted steps. After the installation is
completed, a shortcut will be generated on the computer desktop. Double click the
shortcut to start the EncoderManager:

4.2 Connect to Encoder

Right click the blank space in any of the four windows to select "connect...", and then enter
the IP address of the HD encoder in the address dialog box. To facilitate the explanation,
assume that the IP is 192.168.120.12 and the model of the encoder is
ENC1200/ENC1100. After the IP address and password are entered to the address field,
press "OK", and then you can preview the signal content of the HD encoder ENC-1200.
(Note: change your computer IP address to be in the same network segment and have the
same subnet mask with the encoder, e.g., 192.168.120.100 255.255.255.0, otherwise,
you cannot log on the system.)
Copyright © Shenzhen Reach IT Co., Ltd. 9 / 16