Mitsubishi QD75P1N User Manual page 794

APPENDICES
MELSEC-Q
Appendix 10.11 External I/O signal monitor function
The "external I/O signal monitor function" monitors the module's information and
external I/O signal statuses in the module's detailed information which can be
displayed on the system monitor of GX Works2.
The information that can be monitored are the module's information (same as the
QD75 front "RUN", "ERR" LED indicators) and the following external I/O signals.
Set the logic of the external I/O signals in " Input signal logic selection" and
Pr.22
" Output signal logic selection".
Pr.23
indicates that drive unit ready of axis 1 is ON.
Refer to the following manual for the system monitor of GX Works2.
GX Works2 Version1 Operating Manual (Common)
Appendix - 108