Model Number Identification; Fm/Csa - MTS Systems Level Plus Operation And Installation Manual

Model number identification for FM and CSA approvals
TRANSMITTER MODEL
M = Magnetostrictive transmitter
TYPE
R = Analog output liquid-level transmitter
AGENCY APPROVAL
F = FM
3 = 3-A
OUTPUT
1 = 4-20 mA Single loop with HART
HOUSING TYPE
A = NEMA Type 4X, 316L stainless steel with cable (intrinsically
safe only)
B = Single cavity (explosion-proof and intrinsically safe)
C = Dual cavity (explosion-proof and intrinsically safe)
D = Single cavity with display (explosion-proof and intrinsically safe)
ELECTRONICS MOUNTING
1 = Integral electronics
TRANSMITTER PIPE
B = Industrial end-plug with stop collar
C = Sanitary, T-bar, TB
D = Sanitary, drain-in-place, DP
E = Sanitary, clean-in-place, CP
MATERIALS OF CONSTRUCTION (WETTED PARTS)
Note: contact factory for other materials
1 = 316L stainless steel
2 = Electropolished 316L stainless steel Ra 15
3 = Hastelloy C
PROCESS CONNECTION TYPE
1 = NPT adjustable fitting
4 = Sanitary, welded
5 = Sanitary, adjustable
PROCESS CONNECTION SIZE
A = ¾ in. (NPT for / in. pipe)
5
8
B = 1 in. (NPT for / in. hose)
7
8
C = 1½ in.
D = 2 in.
E = 2½ in.
TEMPERATURE
0
= None
1 = One RTD, fixed position 76 mm (3 in.) from the end of pipe
UNIT OF MEASUREMENT
M = Metric (millimeters) Encode length in millimeters if using metric
(XXXXX mm)
LENGTH
= Order length based on unit of measurement
= Flexible transmitter: 3048 mm (120 in.) to 12,192 mm (480 in.)
(FM IS Group D only)
SPECIAL
S = Standard product
MTS Sensors
Model MR Operation and Installation Manual
Model Number Identification - FM and CSA
C = CSA
2 = 4-20 mA Dual loops with HART
E = Dual cavity with display (explosion-proof and intrinsically
safe)
L = NEMA Type 4X, 316L SS w/6-pin male connector
(intrinsically safe only)
3 = NEMA Type 4X, 316L SS with internal terminal blocks
(intrinsically safe only)
F = Sanitary, drain-in-place, no hole, DN
H = Flexible w/bottom fixing hook (stainless steel only)
J = Flexible w/bottom fixing weight (stainless steel only)
K = Flexible w/bottom fixing magnet (stainless steel only)
A = Teflon
C = CRN Approved
6 = 150 lb. welded RF flange
7 = 300 lb. welded RF flange
8 = 600 lb. welded RF flange
F = 3 in.
G = 4 in.
H = 5 in. (except sanitary)
J = 6 in.
2
= One RTD, customer defined position
∆
Note: (if this option is selected, position '18 E' must
also be selected)
U = US Customary (inches) Encode length in inches if
ordering in US Customary (XXX.XX in.)
= Teflon 508 mm (20 in.) to 6096 mm (240 in.)
= Rigid/Sanitary transmitter: 508 mm (20 in.) to
7620 mm (300 in.)
E = Engineering special
(not affecting agency controlled parts or features)
Level Plus ® Liquid-Level Transmitters - M-Series Model MR Analog Transmitter
7
Operation and Installation Manual, Part No.: 550720 Revision I (EN) 06/2014
M
=
R
=
=
=
=
=
=
=
=
=
=
∆
=
=
13-17
=
1
2
3
4
5
6
7
8
9
10
11
12
18